San Diego BS Thread.

Yeah just talked to manwithoutaplan and hes chamging it to memorial day. Lets get a group to convoy there.

 

I'm setting up a thread shortly. It's on

 

Sweet, let get your sliders banged out before then, just in case

 

Official thread for Memorial GTFO of town run

http://www.tacomaworld.com/forum/so...alley-svra-miller-jeep-trail.html#post6725068

 

Got my OBA set up. 20lb tank from Mikey, regulator from wheelers off road, air hose and fitting from the local parts store. All in all I've got about $170 invested in it.

 

nice!
ya they sure do come in handy, just have to check once and awhile so your not out in the des/trail with a flat and no air.

 

http://www.youtube.com/watch?v=PgyKqmbfdSA&feature=player_detailpage

Didn't you win one of those "I need help because my front tires just roll" straps at the raffle. Don't feel bad, I'm 4wd and you'd do as well as I would.

 

My right foot is heavier than yours and I have less gaf in my blood.

 

2wd with 4wd ASSIST

 

I drove my 5 lugger that way. Don't think the ford would hold up to the abuse the yota went thru. Plus the merc is alot harder to get unf***ed, we can pick up your truck.

 

Can anyone help me chain and sprockets out the chain on my motorcycle?

 

What kind of bike? It's super simple. If your replacement chain has the connecter link with a c-clip, you just assemble the link and snap the c clip on. If it's the rivet type, you can buy a rivet tool from Harbor Freight for like $10. Just use a Dremel to cut off your old chain. To get the shaft sprocket off, have someone hold the rear brake while you wrench it. Might want to hit it with some PB Blaster the day before.

 

Thought I had the rivet type but I opened the box and it's the clip. Going to give it a go.

 

What do you ride? And don't say a Honda Goldwing.

 

I just picked up a set of bedsides, anyone down for a mini mod day so I can install them?

 

Still want my lights, Trigo?

 

Man, I hate unfucking....

It isnt too hard, if you cant do you can bring it to me to have it done, I have done that 100s of times.

Also use a little blue loc tite on your sprocket bolts to make sure they dont come off!

What bike?

 

Anyone know a good place my buddy can take his 4runner to get his fuel injectors cleaned?

 

Go to Harbor freight and buy an Ultrasonic cleaner and do it yourself....use gasoline not water. But remove all O-rings first.

 

I do mod days all the time, but they cost more than beer and compliments, lol. If you wanna pay to have them done I can do it, but I am assuming thats not your goal.

I have done a couple of glass bedsides, just dont cut too much! Cut less and cut again if your unsure to be safe.