OFFICIAL: Pelfreybilt 2005-2011 Front Plate Bumper Group Buy

After a successful 2012+ Group buy we will be doing a group buy for the 2005-2011 bumpers starting in just a few days. Please get on the list if interested and we will get this thing started.

Official Group Buy: 4/20/2013 thru 5/20/2013

Estimated lead time for first 10 bumpers is only 4-6 weeks!

Pelfreybilt is doing a group buy for the 2005-2011 Front Plate Bumpers.
$100 off when we reach 10 bumpers. This will not be limited to 10 bumpers, anyone who wants in on it just sign up before the deal closes

2005-2011 Front Plate Winch Bumpers

These bumpers are made from 1/4" Steel plate in the critical mounting areas, winch, fairlead, D-Ring mounts and frame mounts. The front cover and side wings are 10 ga (.135) total weight with headlight/grill tubes is appx 110lbs. D-ring mount and Hi-lift jacking points are standard on all bumpers. Winches must have a divorced solenoid box to fit. (recommend Warn 9.5XP, M8000, VR8000 or VR1000, divorced solenoid or Smittybilt XRC will fit with solenoid attached. Synthetic lines and Hawse fairleads required)

Options include fog light cutouts (Rigid Duallies recommended or a smaller 3" fog)

LED Bar cutout for Rigid 20" SR series bar

Upper tubes for headlight and grille protection

Base Bumper $800 regularly NOW $700.00 Group Buy Pricing (Includes all access cutouts, D-Ring Mounts and Winch Provisions)
Add Fog Cutouts $75.00
Add LED bar Cutout $75.00
Add full upper tubes, 3 piece center and headlight $150.00
Add Center tube only, includes lateral supports $110.00
Powdercoat $150.00

Includes back brace supports that tie into frame where the sway bar connects

Shipping thru Fastenal is as follows:
Pacific time zone: $75
Mtn time zone: $100
Central time zone: $125
Eastern time zone: $150

2012+ Bumper shown below for LED Bar reference and Full upper hoops
​

A small section of the sheet metal bracket behind the bumper must be nipped and bent to clear fog lights. Can be done with hack saw, cutoff wheel or snips, very simple.




Please reply to thread or PM me to be added to the list, we are not limiting this to 10 bumpers, the price will remain in effect til GB closes.

If you would like to add Skidplate(s) to order the shipping is only addl $20.00 per skid and I will discount all skids $20.00 with the order. They are a great compliment to the bumper.

If you are on the list please PM me with all of your details for what features you want on the bumper. I need full names, address and phone number for Fastenal to reach you at for delivery. Please include an email address for invoicing.

We work on 50% down and 50% upon completion.


1) Taconazo, LED and Fog Light Cutouts & Hi-Clearance Rear
2) MrGrimm, LED and Fog Light Cutouts, Full Upper Hoops, Powdercoated
3) Kh7nm, LED and Fog Light Cutouts, Center Hoop and supports add IFS and Mid Skids
4) Luka, LED and Fog Light Cutouts, Center Hoop and supports add IFS and Mid Skids
5) v8turbo
6) FriedTaco

 

Nice. Get in on this one guys. Tylers work is amazing

 

Put me down for one.

Base Bumper
Add Fog Cutouts
Add LED bar Cutout
Add full upper tubes, 3 piece center and headlight
Powdercoat

 

Put one down for me.
Base Bumper $800 regularly NOW $700.00 Group Buy Pricing (Includes all access cutouts, D-Ring Mounts and Winch Provisions)
Add Fog Cutouts $75.00
Add LED bar Cutout $75.00

 

Please add IFS and Mid skid plates to the order

 

i'm interested in one too!

with fog lights, light bar, center tube and lateral supports, IFS and Mid skids...maybe shipping with Kh7nm would save some off the cost?

I should be able to confirm in a few weeks.

 

Sounds like a good idea. Tyler any discount on shipping for both orders?

 

Currently working with Fastenal for the Hawaii shipping. They are really giving me a lot of push back on shipping there, they used to no problem. We may have to look into another option and see if we can get several orders together on one crate.
Il keep working on Fastenal though, they don't seem to have any trouble shipping to the islands for anyone else, I think it's just my local branch.

 

Question, will the PIAA 510's fit in your fog cutouts?

 

Not sure the size on the Piaa's. The of cutouts are 3.5" inside diameter. The rigids actually sit behind the fog cup. Small fogs may fit inside the cup, others sit behind.

 

Does this help?

 

Yes, this helps. That light would not fit inside the cutout but could mount behind it and probably just about the entire lens would be visible. The only concern would be clearance to the metal bracket that sits below the headlights. If you have one handy we can do a test fit. I am assuming you already have these lights and would like to reuse them.

 

Do you have the Rigid Duallys or D2's for the foglights?

 

Regular duallies. I run the flood beam. They are nice because they are low draw and can wore direct to the factory wiring, no relay needed and still use factory switch. They are brighter than my HID headlights.

 

Yea I think it is about time to switch over to LED's. We are moving to North Carolina next year so I want to get this bumper while I am here when I have the opportunity to pick it up.

 

Bump

 

I'm in!

 

Thanks, will get you on the list. Addin up, couple more and ill start sending deposit requests. I already cut and formed a dozen flat patterns in different configurations so we will hammer these out fast.

 

could I get mine powdercoated too?

read through the other thread and noticed that the warn zeon 8/10-s fits, with the control relocation kit, think it would still fit the lightbar?

http://www.warn.com/truck/winches/ZEON_10-S.shtml

http://www.warn.com/truck/accessories/ZEON_control_relocation_kit.shtml

would free up about 2.7in from the top of the winch body.