too much taco lean

i just got done instaling my ome front&rear suspension lift.now i realize that there would be a lil driverside lean in the front,but i got some leveling spacers 4 that,but the rear is way tilted.i mean real noticeable.both the rear springs had pluses on them,so i didnt think they were different.am i missing something?2004-3.4l-trd-sr5.nitrochargers dakar leafs.would it helpf i switched the rear springs around?

 

I may be mistaken , but I thought the first gen Dakars are side specific

 

i was told that if one has a - on it it goes on the pass side, if it had a + on it it goeson the driver side. i got both ++.

 

Sounds like they sent you two driver side leaf packs then?

 

they are side specific. Also bkwd/fwd specific.

 

i guess i will be makin some phone calls then,let the bullshit run-a-round begin.

 

Side specific Daks are labelled A / B , the + / - is not for side spec IIRC

http://www.cruiseroutfitters.com/tech_OME_leaf_tech.html

 

thanks for that link man,im gona check em out and make sure that they arent an a and a b. i might just switch sides w them.i will figure it out in the am when i have more ambition. thanks again

 

Good luck

 

i switched the springs yesterday,lean problem solved.

 

Just for the record the + indicates the forward install position (+ = front hanger )