1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

rcbs204 4x4 Illuminated Switch!

Discussion in 'RCBS204' started by rcbs204, Jan 4, 2010.

Page 100 of 170
  1. Apr 20, 2013 at 9:04 PM
    #1981
    OZ-T

    #1981
    OZ-T You are going backwards

    Joined:
    Dec 15, 2009
    Member:
    #27584
    Messages:
    50,429
    Gender:
    Male
    First Name:
    Peter North
    British Columbia
    Vehicle:
    Mag Grey 09 Trd Sport DCLB 4x4
    OME 885x , OME shocks and Dakars , Wheelers SuperBumps front and rear , 275/70/17 Hankook ATm , OEM bed mat , Weathertech digifit floor liners , Weathertech in-channel vents , headache rack , Leer 100RCC commercial canopy , TRD bedside decals removed , Devil Horns by Andres , HomerTaco Satoshi
    :popcorn:
     
    OZ-T, Apr 20, 2013
    #1981
  2. Apr 20, 2013 at 9:21 PM
    #1982
    byrd

    #1982
    byrd Unknown

    Joined:
    Mar 1, 2013
    Member:
    #98720
    Messages:
    267
    Gender:
    Male
    First Name:
    David
    Kansas
    Vehicle:
    '06 Access SR5 4x4 6 speed
    Good to hear, if I come across anyone that is looking, I will send them your way. :thumbsup:
     
    byrd, Apr 20, 2013
    #1982
  3. Apr 20, 2013 at 9:29 PM
    #1983
    Sandman614

    #1983
    Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

    Joined:
    Oct 26, 2010
    Member:
    #45273
    Messages:
    35,567
    Gender:
    Male
    First Name:
    Tim
    Garner, NC/Boone, NC
    Vehicle:
    '06 SR5 Off Road
    ARB Front Bumper, Projector Headlights w/Slimcubby 4300K HID's, Oznium LED's, LED taillights, DIY Washable Cabin Moose Filter, Sockmonkey SR5 Off Road, Aux Audio plug, OME 886x, OME Nitrochargers, Wheelers 3 Leaf Progressive AAL, ImMrYo Rear-View Mirror Lift Bracket, Dodge D-Rings
    What's changing in Rev 4?
     
    Sandman614, Apr 20, 2013
    #1983
  4. Apr 21, 2013 at 5:57 AM
    #1984
    rcbs204

    #1984
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male
    Nothing big, just a resistor.
     
    rcbs204, Apr 21, 2013
    #1984
  5. Apr 21, 2013 at 9:32 AM
    #1985
    OZ-T

    #1985
    OZ-T You are going backwards

    Joined:
    Dec 15, 2009
    Member:
    #27584
    Messages:
    50,429
    Gender:
    Male
    First Name:
    Peter North
    British Columbia
    Vehicle:
    Mag Grey 09 Trd Sport DCLB 4x4
    OME 885x , OME shocks and Dakars , Wheelers SuperBumps front and rear , 275/70/17 Hankook ATm , OEM bed mat , Weathertech digifit floor liners , Weathertech in-channel vents , headache rack , Leer 100RCC commercial canopy , TRD bedside decals removed , Devil Horns by Andres , HomerTaco Satoshi
    What's the advantage of that
     
    OZ-T, Apr 21, 2013
    #1985
  6. Apr 21, 2013 at 9:33 AM
    #1986
    Sandman614

    #1986
    Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

    Joined:
    Oct 26, 2010
    Member:
    #45273
    Messages:
    35,567
    Gender:
    Male
    First Name:
    Tim
    Garner, NC/Boone, NC
    Vehicle:
    '06 SR5 Off Road
    ARB Front Bumper, Projector Headlights w/Slimcubby 4300K HID's, Oznium LED's, LED taillights, DIY Washable Cabin Moose Filter, Sockmonkey SR5 Off Road, Aux Audio plug, OME 886x, OME Nitrochargers, Wheelers 3 Leaf Progressive AAL, ImMrYo Rear-View Mirror Lift Bracket, Dodge D-Rings
    more resistance :p

    :canada: don't smack me.
     
    Sandman614, Apr 21, 2013
    #1986
  7. Apr 21, 2013 at 10:14 AM
    #1987
    Only Danks

    #1987
    Only Danks TRUKWERX : Desert Racing Products

    Joined:
    Apr 21, 2013
    Member:
    #102508
    Messages:
    105
    Gender:
    Male
    First Name:
    Bryant
    San Diego, CA
    Vehicle:
    05 Black TRD O/R 4x4
    3" MID-TRAVEL LIFT: Fox 6x2.5 Front RR C/O's, Fabtech unibal UCA, Fox 10x2 Rear RR Shocks, All-Pro Leaf Pack, Fox 2x2.5 Air Bumps all 4, Strapped all 4, TC Gussets:, Lower Arm Cam Tabs, Front C/O Bucket Tower, Spindles, OTHER: Custom Front Bumper skid, Custom Rear Tube Bumper, McNeil Racing 3" Fiberglass Fenders, McNeil Racing 4" Fiberglass TT Bedsides, 2 Matching Vertical Spares, GrillCraft black mesh, 07 LED Tails(black), Headlights (black), Viper 5204 Alarm, Remote Start, Cobra 19 CB Radio, 6 ft Red LED Firestick Whip, High-lift jack, Black Emblems, STEREO: Custom Nexus7 inDash, Rockford 3sixty.3 to SPDIF, Rockford T1 6.5 Comp Front, Rockford T1 6x9 rear, Rockford PBR300x4 Amp, Rockford P310 (x2) rear seats, Alpine 1100w amp, USB DAC via SPDIF, USB Audio ROM, FUTURE MODS: TC +2" LT Kit, 8" LT Coilover, 16 Rear Piggys, L/T CV Axle Shafts, Heim Steering, DMZ SUA kit, Bedsaver cage, Shackle Crossmember, Motor Mount Gussets, Box Frame
    Stoked to hear youl be making more LED boards.
    Question: are the LEDs the same PLCC-2 1210 / 3528 SMDs as the guage cluster?
    I was considering buying whatever color you had available and customizing it.

    But if your making more can i be the first order request!?
    I Just changed my guage cluster to red/white,

    Thanks in advance
    -OnlyDanks
     
    Only Danks, Apr 21, 2013
    #1987
  8. Apr 21, 2013 at 10:15 AM
    #1988
    rcbs204

    #1988
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male
    I increased the R7 to a 2 watt SMD pads, so it easier for me to solder, I had a few units where the current limiting resistor was soldered poorly because the pads were too small for the resistor I was using. In order for me to ship Rev3 boards, I had to slightly lift the resistor to make sure there was ample solder under the resistor so it would not fail in the field (Cold Solder Joint). So I increased the the foot print, and now it will be more manufacturable.
    Always improving!!

    Wiki:
    (Cold Solder Joint)
    The most common defect when hand-soldering results from the parts being joined not exceeding the solder's liquidus temperature, resulting in a "cold solder" joint. This is usually the result of the soldering iron being used to heat the solder directly, rather than the parts themselves. Properly done, the iron heats the parts to be connected, which in turn melt the solder, guaranteeing adequate heat in the joined parts for thorough wetting. In electronic hand soldering the flux is embedded in the solder. Therefore heating the solder first may cause the flux to evaporate before it cleans the surfaces being soldered. A cold-soldered joint may not conduct at all, or may conduct only intermittently.
     
    rcbs204, Apr 21, 2013
    #1988
  9. Apr 21, 2013 at 10:17 AM
    #1989
    rcbs204

    #1989
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male

    Yes they are PLCC-2, When I get the new rev of boards I will be happy to customize you a board. The new boards will be available in about a week.
     
    rcbs204, Apr 21, 2013
    #1989
  10. Apr 22, 2013 at 9:17 AM
    #1990
    miacevedo

    #1990
    miacevedo Well-Known Member

    Joined:
    Sep 24, 2010
    Member:
    #43746
    Messages:
    454
    Gender:
    Male
    First Name:
    Mike
    SoCal
    Vehicle:
    SuperWhite 4X4
    All Pro Hybrid front bumper. All Pro rock sliders. Warn Winch. Icon 2.5 Remote Resi Coilovers & Rear Icon 2.0 Extended Remote Resi's. AP Standard leafs. Rear SuperBumps. OEM bed mat and All Weather floor mats. Pelfreybilt IFS Skid. Method NV wheels on 285/75/16 Toyo Open Country AT2.
    Received my switch over the weekend. Thanks!
     
    miacevedo, Apr 22, 2013
    #1990
  11. Apr 22, 2013 at 7:14 PM
    #1991
    rcbs204

    #1991
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male
    :thumbsup:
     
    rcbs204, Apr 22, 2013
    #1991
  12. Apr 22, 2013 at 7:38 PM
    #1992
    45longcolt

    #1992
    45longcolt Well-Known Member

    Joined:
    Dec 1, 2007
    Member:
    #3663
    Messages:
    1,222
    DFW Area
    Vehicle:
    2020 Off Road
    rcbs204, Does this mean you reload the 204 Ruger cartridge?
     
    45longcolt, Apr 22, 2013
    #1992
  13. Apr 22, 2013 at 7:39 PM
    #1993
    Sandman614

    #1993
    Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

    Joined:
    Oct 26, 2010
    Member:
    #45273
    Messages:
    35,567
    Gender:
    Male
    First Name:
    Tim
    Garner, NC/Boone, NC
    Vehicle:
    '06 SR5 Off Road
    ARB Front Bumper, Projector Headlights w/Slimcubby 4300K HID's, Oznium LED's, LED taillights, DIY Washable Cabin Moose Filter, Sockmonkey SR5 Off Road, Aux Audio plug, OME 886x, OME Nitrochargers, Wheelers 3 Leaf Progressive AAL, ImMrYo Rear-View Mirror Lift Bracket, Dodge D-Rings
    :notsure:
     
    Sandman614, Apr 22, 2013
    #1993
  14. Apr 22, 2013 at 8:20 PM
    #1994
    rcbs204

    #1994
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male
    Yes I do! I have a Kimber Long Master in .204, and it is one of the finest shooting guns I own!! They no longer make that gun in .204, so it is actually a collectors item now!!
     
    rcbs204, Apr 22, 2013
    #1994
  15. Apr 22, 2013 at 8:42 PM
    #1995
    45longcolt

    #1995
    45longcolt Well-Known Member

    Joined:
    Dec 1, 2007
    Member:
    #3663
    Messages:
    1,222
    DFW Area
    Vehicle:
    2020 Off Road
    Very Cool. That "rcbs" just kept gnawing at me so I had to ask. I have had my Rock Chucker for 4 decades now, I started young. :)
     
    45longcolt, Apr 22, 2013
    #1995
  16. Apr 22, 2013 at 8:46 PM
    #1996
    rcbs204

    #1996
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male
    Thats great, I have a RockChuckerII and a Dillon 1050 to reload the AR and handguns!!:D
     
    rcbs204, Apr 22, 2013
    #1996
  17. Apr 22, 2013 at 8:53 PM
    #1997
    scotch

    #1997
    scotch Well-Known Member

    Joined:
    Jul 13, 2011
    Member:
    #59827
    Messages:
    240
    Gender:
    Male
    First Name:
    Mark
    Centennial, CO
    Vehicle:
    2012 Tacoma, 2015 Tacoma, 2005 4runner 4.7L
    Lots of Stuff
    How will we know when we can order the new boards? will it be posted on your website?
     
    scotch, Apr 22, 2013
    #1997
  18. Apr 22, 2013 at 8:56 PM
    #1998
    rcbs204

    #1998
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male
    You can order now, I have stock Amber, and can make any color combinations of blue and white. I will edit the website and set all to in stock.
     
    rcbs204, Apr 22, 2013
    #1998
  19. Apr 22, 2013 at 9:04 PM
    #1999
    rcbs204

    #1999
    rcbs204 [OP] Well-Known Member Vendor

    Joined:
    Oct 2, 2009
    Member:
    #23681
    Messages:
    3,948
    Gender:
    Male
    All Items IN-STOCK!!!
     
    rcbs204, Apr 22, 2013
    #1999
  20. Apr 25, 2013 at 10:03 PM
    #2000
    oledragoon

    #2000
    oledragoon Well-Known Member

    Joined:
    Apr 15, 2010
    Member:
    #35327
    Messages:
    133
    Gender:
    Male
    First Name:
    Don
    Oklahoma City
    Vehicle:
    06 Super White Tacoma TRD Off Road 4x4
    Super White Grille, and rear bumper on Off Road, TRD Intake System, TRD Cat Back Exhaust System, Custom bed bar for Emergency light bar, Overhead Console Temp/Compass Fix,rcbs Illuminated 4x4 Switch, ImMrYo Rear-View Mirror Lift Bracket, Jumpers LED's in cab, Jotto Computer desk, Cobra 29 CB & Uniden Scanner on custom dash pad, Autometer gauges(oil press, oil temp, trans temp, Batt/amp), Front bush guard, Rear bumper guard, BamaToy1997 4x4 Custom Front Hubs, OTW Mod One Touch Windows.
    Not sure you got my pm from 4-20, but I wanted to thank you publicly for your help with my kit. Well done Sir!!

    Not sure how to give you the credit thingys, thanks again!
    dc
     
    oledragoon, Apr 25, 2013
    #2000
Page 100 of 170

Products Discussed in

Posi-tap® Connector, 20-22 Gauge Wire, Pack of 5
$7.89
To Top