What Have You Done To Your 2nd Gen Tacoma Today?

Installed door sill protectors.

 

Viair 300P
Moves a LOT more air than a Canadian tire $20 portable.

Ran power along the frame, and up through the floor under the drivers seat (pic showing wire grommet) to bypass being close to the cat. exited through firewall grommet.

fit perfectly in one of the cubbies.. However holding the screws was a bitch.
I used phillips, and had to take a long shaft screwdriver and bend the tip to get under the unit. Use hex bolts.

 

..

 

New shoes for me!

 

this is a great way to store one of those compressors. I hate lugging mine around in the cab.

Write up with more detailed images and steps?

 

Yes I want a write up! I picked up a MF1050 and have it in the cab and plan to hardwire it.

 

Well I got a bed mat to keep my stuff from sliding around and a cargo net.

 

Tint, removed the "prerunner/sr5/v6" badges. That rear chrome bumper is next!

 

More detail on the aux fan???

 

I went all out today. Put new brakes and calipers on the front,along with some new Denso's for good measure,they made it to 128,000 and still looked good, along with the original brake pads. Then replaced my 5100's with a new set, along with some 885 X's,new washers, isolators, top hats,extended studs. Then added the half inch top spacers,and for good measure the 1/4 Taco Lean spacer. Then added a new heavy duty Sway Bar and new bushings. The Expo's in the rear give me exactly 3" over stock, and the new stuff in the front is sitting right at 3.5" on both sides when just off the lift and a couple miles on it. Hopefully they will settle to an even 3 " . Going to drive it a week for everything to settle in, then head for the alignment shop. As of right now the difference is night and day compared to the 5100's set at 2.5" This setup is much nicer riding,and seems alot tighter on the road.

 

Adjusted a few things. . .





​

 

MOAR!!!

 

^Thats all I have for now.

 

Such a tease

 

*cough* need to wire those roof lights *cough*

 

where did you get the cargo net? Much better than the bungie style

 

Haha ^

 

Goddamn!

 

Picked up some goodies for the weekend and next week
-

-
New tonno cover slips and straps. ToyTec 1/4" and 1/2" spacer kit. Black TACOMA sticker, and some plasti dip (I cant explain to you how hard it is to get this stuff here in hicktown) to paint the chrome bumper

 

Put the new rubbers on. Defiantly happy I went with 265/75s!!! Now to paint the wheels black....