Tires for 2 inch lift

I have a 2013 double cab tacoma and i want to do a 2 inch lift. What is the tallest tire i can fit? I dont necessarily want a fat tire that sticks out beyond the fender....but i do want the tire to fill up the wheel well nicely.

I did a search, but it seems like the search feature for the app sucks.

If u guys could post pics of your trucks with a 2 in lift and info on the tires you have that would be great. Thanks for the help. Love the forum.

 

I have the front lifted 2in and will soon have TSB rear leafs. I'm going 265/75-16.

 

I have a 2 inch lift with 5100s and im running 265/70/17's. The rubbed the mudflaps at full turn but no rub since I took them off.

 

Very nice. Keep them coming

 

How about 1.75 of a lift? close enough lol i got Nitto Terra Grapplers on 265/70/17 no rubbing.

 

255/75/17 with billies @1.75 and 1.5aal

 

See: http://www.tacomaworld.com/forum/wheels-tires/67550-largest-tacoma-tire-sizes-stock-suspension.html

With a Bilstein 5100 lift, the suspension at full compression is at the same place as stock, so the biggest tire you can fit is unchanged.

 

Thanks everyone. This really helps me get an idea of i can do.

 

265/75/16 - 5100s set at 1.75" in the front. 4 Factory leafs in the rear. No Rubbing. Much better ride & handling than stock.

See my write ups on this topic
http://www.tacomaworld.com/forum/wheels-tires/260429-2013-dcab-small-lift.html#post6375347

 

I like your truck!

 

You can probably fit a 275 70 17 with billies at 1.75 and trimming. Im running 265 70 17 and I bet I could go bigger. Only downside is not many tires to choose from in that size.

 

Thanks!

 

Sounds good mark. I should also mention that i have 16 in wheels. U guys have some nice trucks!

 

OME 884 springs with Bilstein 5100s @ 0 for exactly 2" of lift. Tire size is 265/70R17. Had to eventually remove the front mudflaps and do some plastic trimming to eliminate rubbing. Most of the rubbing was probably due to the aftermarket wheels I have with 4.5 backspacing.

 

2" front/back on 265/75/16 bfg at's

 

You think u could go one or two sizes taller without rubbing? Nice truck

 

I run 285/75R16's with 2" of lift in the front. Had to remove mud flaps, trim some plastic and do cmc.

 

I have about 1 1/2 inches of lift from Eibach coils and the tsb leaf pack. I haven't trimmed or removed anything. My tires are 255/85/16 BFG KM2 Mud Terrains mounted TRD fake beadlock rims 16x7.5 with 4.5 inches of backspacing.

 

im wondering the same question as OP. I have the 2 in lift already and am still running the tires I had when there was no lift. 265/70/17 and there was no rubbing at all. I would like to go with a taller tire but unsure of how tall I can go. I see some people have a 75? does anyone have an 80? or do they even make those?

No lift:


LIft:


Same tires

 

correction my size is 65 not 70...stupid me