How will these rims work?

I went into discount tire yesterday and the rims I liked would not look right(says the salesman). I was looking at a 16x8 and he said they would stick out to wide??? So now Im looking at other options. What do you think about these? http://www.discounttire.com/dtcs/interactive.do?yr=2008&pc=52928&vid=012442&rc=TXSINT

 

Link don't work.

 

http://www.bgrodworks.com/eng/wheels/gasser-gun-metal-machined-face/

 

I see the offer a 17x8 with a 35 back spacing those should work out real good

 

You should be fine x runner wheels are 18x8 +30 5 mm in you won't poke at all

What size tire u looking to run?

 

Not sure,I want the xrunner rims but cant find them. Its hard to find a rim with 30-40mm offset. I will most likely end up with a 16-18in rim with more of a street tire because the 5 luggers are setup for more of a car rim instead of a truck rim. I think the 5 lugs are a great truck,just the right size. I just want the right rim and right tire with the right stance,I want that real clean,sharp look. I plan on adding the bilstiens all around that go on the x-runner.

 

http://www.finishlinewheels.com/TOYOTA/TACOMA/2010/A-69460U20/

 

Only one place in the world they spell a city name like Schertz.
Small world, used to live there.

/off topic.

 

Click it a 2nd time.

Discount tire frequently does that.

 

Id say run a 18 if you can I personally feel running 16 or 17 still shows alot of tire even if its a small stock height tire

18's on 245/45/18 or 255/45/18 would be prefect for a street look without being on rubber band tires

are you planning on lowering the truck?

 

No,other than the minimal(if any) drop I'll get with the bilstiens

 

with a 35mm bs, your rims will be about 0.5" within the wheel well. I have OEM Murano's on mine and they have a bs of 35mm.

http://www.allfactorywheels.com/pro...=product-ads&gclid=CN-FsuT57rYCFWKCQgodn0QAdw

 

Yowza....200 a rim! Hmmm? might try to look for something cheaper. If I can't,i know where to go. Thanks.

 

That looks sharp 07.

 

You're looking at almost that for the Gassers.... save up a bit longer, or save on the spare and go with an 18" steelie.

 

Holy moly!!!!!!!!!!

That's a lot of camber doe

 

I'm starting to get the hang of using manual on the DLSR. would have been better if I had washed the truck

 

it's addicting!!!!! nah I figured out how to fix it though

 

Is that with just the LCA spacers?