What Have You Done To Your 2nd Gen Tacoma Today?

Lol, it would look good on your truck.

$5 can of Krylon Fusion, some masking tape, and about 30 minutes of time is all it would take you to do it. I was worried it would be hard to mask the lettering, but I just masked over it and trimmed the tape around the lettering with a razor blade. It was pretty easy.

 

finally properly organized all of my wiring with the fuse box and new battery terminals.

 

I didn't heat it - I sprayed it with a cheap Wagner sprayer. It pretty much mists the linseed oil. The label suggests heating for coating wood. I'm sure it would flow better and probably drip more off the frame work. Please let me know your experience with your Pops old pneumatic undercoat gun.

 

Beautiful job ! How do U like the Yellow Top ? Thinking about getting one. Thanks. Curious George.

 

Thanks, yellowtop is almost 3 years old. I'm on the coats in florida, which is a recipe for short battery life, and it's still going strong. it runs a lot of extra stuff, sometimes without the motor running, and shows no signs of slowing down thus far. yellow for sure over a red.

 

Agreed. I had nothing but HORRIBLE luck with red tops. Never a problem with yellows.

 

That is very clean job well done man

 

Thanks! how are the road ventures treating you. i've always like those tires

 

So far so good, bought them for 230 a tire for 315/17/70.

 

Thanks for the reply. Heat in Florida kills the battery ?

 

Interesting. 2 votes for the Yellow.

 

heat, humidity, and a very corrosive environment. even with globs of dielectric grease, i have to take my clamps off and clean terminals every couple months. we've been in the mid 90s all week, so heat is definitely an issue with lifespan

 

That's a new one on me "very corrosive environment". Salt in the air ? Salt on the road kills frames up here but battery terminals are good so far on my '08.

 

Took some pics the other day

 

Added Access Literider and did the anytime fog mod.

 

Added Access Literider and did the anytime fog mod.

 

Got it out of 4L. Wasn't easy.

 

Pics!

 

Cleaned up my headlight lenses in the process of doing BHLM. I used the 3M Headlight Restoration System (39008):

 

Threw the Grillcraft on that's been sitting in the corner of the living room for a few weeks.