What Have You Done To Your 2nd Gen Tacoma Today?

Blew the 12V outlet fuse while airing up a tire with the Viair compressor. Reviews on Amazon indicate it draws a hair more than 15A. Replaced the fuse with a 20A and no more problems.

 

I picked up a compressor that runs from a SLA battery. Plug the charger into the truck.

Too slow and the battery doesn't last long enough for airing up after running offroad, but it's a great alternative to:
A) A bicycle pump
B) Paying a FUCKING DOLLAR at a gas station and then finding that the chuck is broken or the air is wet.

 

You said hand-flap.

 

Thanks, not a bad price.

 

I pull in after someone else.
I know the hoses are good, and usually get a couple of free minutes (which I usually pass on to the next guy anyways)

 

Got about 75% finished with my N-Fab light bar project. Bar is in, missing some nuts for a few bolts and need to wire up the switch, but it's in.

Please excuse the poor quality photo, snapped it as I was cleaning up at twilight.

 

Installed Bilstein 5100's and a Wheelers 3 leaf AAL.

 

Replaced Passenger side LCA. Not too bad. started at 1400, finished at 1730.

 

^You are in Cali. From what I read, those LCA cam bolts don't come out so easily after road salt exposure.

This is a good idea.

 

What u talking about road salt? we dont have snow down here..unless i drive 2hrs north to it. My bolts came off fairly easily, did need breaker bar. lubed and reinstalled with no prob.

 

^That's what I was trying to say. The LCA bolts don't come out as easily for people living in the northern states.

 

Mine were seized after a year

 

mine were seized and I broke a bolt will probably hold off on lift now :cry:

 

Installed my cb today!!!

 

Installed iPad on dash

 

this

 

Clay blocked.