What Have You Done To Your 2nd Gen Tacoma Today?

TRD OR & Sport come as prerunners in 2wd

 

Put some tension on the winch line since it unraveled a bit when swapping it over to the new bumper

 

Not worried about body flex and contact with the bumper? I see very little space between the fender and bumper.

 

just finished an oil change, wiped down the engine bay a little, and topped off the antifreeze (water pump has a slow seep... seems to be getting slower, but it's still present...)

 

Yeah it's a TRD OR but 2wd, just have an e-locker

 

It's got roughly 1/4" for now. Not a very good angle. I will probably drop it a little bit lower though when I get the chance. The only part that it will contact is the fender flare, which has a little movement to it. I originally built it to have a 3/8 gap, but it twisted a little more yhan I expected, so I had to shim it in a couple spots to get it parallel whith the fender. I don't do much off-roading, so I'm not in a huge rush to adjust it

 

Got it, looks good either way. Wish I could get away with less gap since it looks better but already have rubbing as it is.

 

Ahh, the TEXAS edition, I like that mod.

 

Nice!

 

What kind of weapon is it?

 

It's a kel tec

 

yesterday.

 

New(ish) KelTech shotgun.
Dual mag tubes, 7 rounds in each tube, selectable, so you can run buckshot in one and birdshot or slugs in the other.

 

This I can use.... ^ what kinda $$ cha ching buys it?

Hahahaha. Evolution of the 870 Sawed Off Pennsyl-tucky Mod.

Yep, that it is. Compact pump action 12 gauge shotty with dual tubular magazines. The early versions had feed problems. They are salty $.

Remington 870 Police. Short. Illuminated. Proven @ 1/2 the cost. Not quite as compact as the KSG 14, but I don't mind. Twin, less carded 6 carrier on the left side of my receiver...



Haven't ever fitted it to the under-rear-seat storage, but I bet it will go.

 

Nice lookin' Remy you got there. I'm more of the Mossberg type. I have a Mossberg 500 A special purpose. 18 1/2" barrel, 7+1, mesa tactical AR stock adapter with ACE HAMMER. My stumpy little trigger finfer doesn't like having to reach up to the front of the trigger guard. Therefore I sport a Mossberg.

 

Roger that, I have two Mossbergs, one a Special Purpose Turkey, M4 stock 20" tube all factory cam'ed up for the woods. Turkey's don't like it much.



It works really well and I do very much prefer the safety on the top of the receiver, even more so than the 870 safety. The 870 is a duty piece, same as issued, but mine, since few take care of them like you would your own. I need it to work 100% and hit whatever I point it at.

I'm a southpaw, so swapping safety direction on the 870 was a must. The Mesa Tactical products are very well built... my rear stock is theirs, a Urbino model, pistol grip is dandy for one handed operation.

 

Derped the wheels because I was bored.
Not too bad actually.