1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Boostedka's Turbo 3RZ Tacoma Beretta and DixieGirl Build's The Supracharged King Ranch Bundle of Merriment Build BlackPearl Build/Adventure (DC 4x4 TRD) (Super/Charged 3.4) LOTS OF PICTURES BartMaster1234's (Almost) Supercharged 2.7l 1998 PreRunner 4x4 Conversion [Build Thread] Silverbullet02's 2002 Regular Cab Build Thread

The Frankenstein Build! LT/Expo/Trail rig..and BS

Discussion in '1st Gen. Builds (1995-2004)' started by Blackdawg, May 28, 2011.

Page 189 of 647
  1. May 22, 2013 at 8:34 PM
    #3761
    Blackdawg

    #3761
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.

    gonna make one! haha using my small Viair V60 compressor and an old keg :spy: should be sweet :D
     
    Blackdawg, May 22, 2013
    #3761
  2. May 22, 2013 at 8:35 PM
    #3762
    PcBuilder14

    #3762
    PcBuilder14 Well-Known Member

    Joined:
    Jun 19, 2011
    Member:
    #58522
    Messages:
    23,311
    Gender:
    Male
    First Name:
    Brent
    Nor Cal
    Vehicle:
    2018 Tacoma TRD Off Road 4x4
    Haha cool! :thumbsup: Post plenty of pics of the process!
     
    PcBuilder14, May 22, 2013
    #3762
  3. May 22, 2013 at 8:42 PM
    #3763
    Lumpskie

    #3763
    Lumpskie Independent Thinker

    Joined:
    Apr 20, 2013
    Member:
    #102450
    Messages:
    1,978
    Gender:
    Male
    New Hampshire
    Vehicle:
    '96, 4x4, v6, manual hub
    Toytec 16" coilovers with Tundra Bilstein 5100s, Light Racing UCAs, Alcan Leafs with Orbit Eyes, 12" Bilstein 7100 short Bodies, ARB rear locker, 33x12.5 Duratracs, CBI sliders, Bushwacker fender flares, self made front bumper, M8000, Vision X 6.7" Hi/Lo Beam HIDs, full skids, Inchworm dual case setup - 15º clocking
    And I was proud of my Zodi shower setup...
     
    Lumpskie, May 22, 2013
    #3763
  4. May 22, 2013 at 8:48 PM
    #3764
    Blackdawg

    #3764
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Oh i will :D im excited! should work great i hope.


    :laugh:

    Don't worry..you can be cool like me too :p haha...you have crawler...so..your already cooler...and locker..so..way cooler. haha
     
    Blackdawg, May 22, 2013
    #3764
  5. May 22, 2013 at 9:03 PM
    #3765
    benbacher

    #3765
    benbacher Purveyor of Fun Vendor

    Joined:
    Jun 29, 2011
    Member:
    #59032
    Messages:
    9,216
    Gender:
    Male
    First Name:
    ^
    Anchorage, AK
    Vehicle:
    '10 Tacoma 4x4 LBDC SR5 TRD Sport
    Too many to list now.
    I have dual swingouts en route. Too short to be tables, but I also have a master plan :spy:
     
    benbacher, May 22, 2013
    #3765
  6. May 22, 2013 at 9:08 PM
    #3766
    Digiratus

    #3766
    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,757
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Total Chaos Sprindle Gussets Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Haltech IC-7 Display with Mako Dash Insert Haltech Elite 2500 Standalone ECU Magnuson MP62 Supercharger w/URD 2.2" Pulley Denso 650cc Fuel Injectors Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit Doug Thorley Headers 2.5" Magnaflow Hi-Flow CAT Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers Braided Steel Brake Lines Kenwood TM-71A Dual Band Ham Radio Larson 70CM/2M Antenna Midland MTX275 GMRS Radio w/Roof Mount Antenna Uniden 520xl CB radio 3' Firestik Adjustable tip antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    When the awning is mounted, how hard is it to unzip or zip up that side of the RTT cover?

    :woot: Good to see it back on and straight. Should hold up better to the abuse too. :cool:
     
    Digiratus, May 22, 2013
    #3766
  7. May 22, 2013 at 10:22 PM
    #3767
    Blackdawg

    #3767
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Ahhhh well sweet. Ill wait and see :popcorn:

    Bout time. Was getting worried with you not checking in here.

    Tent isn't that bad. The two places where there are the brackets it's just like zipping the corners. Not bad at all.

    And yes!! Should be much more stout :cool:
     
    Blackdawg, May 22, 2013
    #3767
  8. May 22, 2013 at 11:21 PM
    #3768
    Blackdawg

    #3768
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Worked on my front skid tonight.

    Had to trim some of the upright tabs..

    This one goes inbetween the LCAs.

    e4c69a929c8c5549c648ed96679d445c_zpsb648_cdd19f2fccaa61a39af7b45b8a07012a84994560.jpg
    6af19b93af8124eaf88a3461f7f58a2e_zps7966_d1d7299bdf9848c9af1d7ec2b0c4e66d1e03ede8.jpg

    No more hitting the bolt

    915118f1d85f965931d91b93645e42be_zps5c02_a90cbcb2a01611eb2bbfbe3d6f7b4010f72e400f.jpg

    Lol ass backwards

    f78a8fe85ac5ff39fde9aa506646c247_zpsbb6a_d6415038d8789585184bf1154953262d8247b859.jpg

    Also trimmed the front tabs.

    6237ed460f1e20a7e719fa6d1d6c69e3_zpsdec4_0ead1a0082048d0254d67b10dcf8b042b99ea661.jpg
    010edad869d41b022ad5c755ba6b7c1a_zpsc6b9_ae299c6f3c450d8808cc7f6b3b45eb301f9c3955.jpg

    Now drilled out the bottom stock tabs to hold 3/8th carriage bolts.


    Also going to add 3" out back and bend it up with another 3" piece since it stops right at the rack.
     
    Blackdawg, May 22, 2013
    #3768
  9. May 22, 2013 at 11:29 PM
    #3769
    IDtrucks

    #3769
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    boot kinda looks like mine!

    luckily im changing them tomorrow
     
    IDtrucks, May 22, 2013
    #3769
  10. May 22, 2013 at 11:32 PM
    #3770
    Blackdawg

    #3770
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Been like that forever. Drive all last year with one like that. I hope they explode. Then ill just HAVE to get LT :D
     
    Blackdawg, May 22, 2013
    #3770
  11. May 22, 2013 at 11:33 PM
    #3771
    IDtrucks

    #3771
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    thats retarded. they have to be dry as a whistle
     
    IDtrucks, May 22, 2013
    #3771
  12. May 22, 2013 at 11:36 PM
    #3772
    Blackdawg

    #3772
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Probably. I don't care. Jerry drove his for thousands of miles broke open. I'm not even at 120k barely drive it anymore. It's officially a toy. Tho my dad saw them and thinks we should reboot them..
     
    Blackdawg, May 22, 2013
    #3772
  13. May 22, 2013 at 11:42 PM
    #3773
    IDtrucks

    #3773
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    huh. well i sure as shit would reboot em for lander!

    like my sig pic lol
     
    IDtrucks, May 22, 2013
    #3773
  14. May 22, 2013 at 11:52 PM
    #3774
    Blackdawg

    #3774
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    I drove lander with one blown haha and magruder lolo and independence pass. And every other trail. First one blew in the roll over. Idk when the second did.

    I know where to get two new stock ones. Just haven't gone to get them.
     
    Blackdawg, May 22, 2013
    #3774
  15. May 22, 2013 at 11:59 PM
    #3775
    IDtrucks

    #3775
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    Oh please blow your u joints on the wyo trip...CALL THE FRV!
     
    IDtrucks, May 22, 2013
    #3775
  16. May 23, 2013 at 12:02 AM
    #3776
    Blackdawg

    #3776
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Hahahahahahaha hopefully not..haha

    And u joints wouldn't blow..or you mean the one in the cv?

    Also skid now hangs by itself!! Real armor :cool:

    That's what you need for lander haha
     
    Blackdawg, May 23, 2013
    #3776
  17. May 23, 2013 at 12:04 AM
    #3777
    IDtrucks

    #3777
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    ya. or cv joints...whatever. isnt it just a glorified u joint anyway


    also wrong. i dont need skids or 33s, i got a locker :D
     
    IDtrucks, May 23, 2013
    #3777
  18. May 23, 2013 at 12:05 AM
    #3778
    Blackdawg

    #3778
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Yea I think so.

    Like I said. Probably go buy the two at the junk yard and just swap em. Then repair these and have 2 spares.
     
    Blackdawg, May 23, 2013
    #3778
  19. May 23, 2013 at 12:06 AM
    #3779
    Blackdawg

    #3779
    Blackdawg [OP] Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,591
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    You will be glad you have 33s. Even with mine my diff took a beating and LCAs and front skid.

    Be a shame to destroy the rear locker that you don't need in lander haha
     
    Blackdawg, May 23, 2013
    #3779
  20. May 23, 2013 at 12:08 AM
    #3780
    IDtrucks

    #3780
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    gtfo lol. and ya i think i need an actuator skid. do not want to fuck that up.


    "oh so glad i have my locker, but i dont really need it over this diffucult rocky terrain" said NOBODY EVER
     
    IDtrucks, May 23, 2013
    #3780
Page 189 of 647

Products Discussed in

Alpine X-Series X-A90V 5-Channel Power Density Amplifier w ID
$899.95
Energy Suspension 9.8108G 3/4" Hourglass Shock Eye Bushing
$9.44
OTC Differential Side Bearing Puller Set - 4520
$134.99
Uniden PRO520XL Pro Series 40-Channel CB Radio. Compact Design. ANL Switch and PA/CB Switch. 7 Watts of Audio Output and Instant Emergency Channel 9. - Black
$64.98
Uniden (BC7) Bearcat 7-Watt External Communications Speaker. Durable Rugged Design, Perfect for Amplifying Uniden Scanners, CB Radios, and Other Communications Receivers.,Black
$16.98
Blue Sea Systems 5025 ST Blade Fuse Block 6 Circuit with Ground and Cover
$23.05
Yost Vises 750-DI Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Large, Blue
$182.90
Albright DC88P Equivalent Reversing Contactor: 12 Volt (Winch Contactor)
$110.00
Genuine Toyota Parts - Joint Assy, Lwr Ball (43330-39825)
$144.99
Hayden Automotive 678 Universal Rapid-Cool 9.5” x 11” Add-On Transmission Cooler – Not for Direct Replacement of the OE Cooler
$52.60
Differentials: Identification, Restoration & Repair
$43.95
SmittyBilt 2IN RECEIVER CLEVIS BLK - SB29312B
$38.35
Toyota 90404-51026 Intake Air Control Valve Union
$7.65
Toyota Breather Plug - 90930-03136
$11.99
To Top