fs: 2003 Tacoma double cab long bed(yes long bed)

How well did it get fixed after this
Check bottom of page in link
http://www.tacomaworld.com/forum/long-travel-suspension/134350-long-travel-toyota-gallery-52.html

 

woah now that is something to think about

 

Awe snap

 

Reminds me of that one Raptor for sale...

 

Here is what he said was broken

"bent the lower ball joint. sheared all 4 bolts holding the spindle to the lower ball joint. bent the spindle itself. broke a piece of the brake rotor. broke the brakeline banjo bolt. broke the bracket holding the driverside headlight. broke my electric radiator fan mount. and for the rear end it sheared the leaf spring alignment pin and shifted the rear axle about 7" up"

 

THAT might be why the rear axle and bed alignment looks a little wonky.

 

Idk damage doesn't look too bad. We would need a closer look at the spring hangers to determine if that's the problem. Thinking maybe the frame bent.

 

everything that was bent or broken was replaced after the accident. got new spindles/lower balljoint/brake caliper/brake rotor/leaf spring axle alignment pin

yep a light rear end + worn out tires + rain soaked freeway = spinning out on the freeway interchange

yep becuase of the sheared leafed spring alignment pin itheres was nothing really preventing the axle to move.

rear axle and bed alignment are good just bad pics i'll snap some pics in the morning. keep on forgetting and i don't really come on here that often. i'm mostly on ttora, dr, rdc

frame is not bent. damage only looked bad because of the tire being at a spot that it wasn't suppose to be at lol

 

The fact that you didn't mention the accident, in my book, is a deal breaker.

Good luck with your sale though... Hopefully someone is able to appreciate the work you've done.

 

Busted truck. Sketchy OP.

 

any reason the rear axle isn't lined up with the wheel wells? im sorry but this seems to be kind of a hack job.

and the "angle" of the picture is not why they dont line up.

 

I don't think it's the picture either, it looks off on both sides , and if it was the picture , the op would have taken new ones by now

 

He also says he don't get on here much, and he is open to any reasonable offers. Regardless of how it looks there was a lot of work done to it, Good luck bud.

 

I remember looking for pics of this awhile back... Cool truck

 

x2...they seem to line up in the picture of the wrecked truck, but the bed lines and cab lines just don't match. cant mess that up with camera angle. the bed is about an inch lower on the drivers side and a half inch lower on the passenger side.

 

to the top. need the truck gone asap any reasonable offer will get the truck. just updated with pics just taken today

 

At least the bed lines up

 

yeah but we still have no interior or undercarriage pictures or any photos shedding light on how the frame was extended. PLUS he didn't even bother to mention he was in what looks like a total loss accident.

this entire deal does remind me of that Raptor guy

 

Those are updated pics? I never saw the original pictures, but the bed still doesn't line up on either side.

Thing is a hack job, anyway. Scary that you don't mention pertinent shit like accidents and repairs and frame mods. Who cares if it's the "only long travel first gen double cab long bed" when you buy someone else's mistake.

GLWS anyway, but I doubt you find any buyers on the internet with sales pitches like this, and tons of missing info.

 

So many comments from people who aren't even interested in buying this truck, it's like troll central in here..

Why do people care if "this doesn't line up" and such if they're not even remotely interested in purchasing??! Nearly every comment bashes his truck then has the nerve to say GLWS

I don't know this dude, but give him a break already..

-Bubs