Duratrac 315/75/16

Ok so my truck was totaled a few days ago...by my girlfriend...yea I know. But anyway im going to pick up an 05 Access cab TRD off road in the next few days and once I get it I want to get the same 3" pro comp lift I had on my old truck. But this time Im also getting a 2.5" leveling kit. Now I found some duratracs I want to get. They are 315/75/16. Overall about 34.6 inches. Im sticking with the stock TRD rims and was wondering if yall think this will work. And if ill have to trim anything.

Thanks

 

35s on a 3" lift and you are wondering if you have to trim, the answer is yes

 

Im also putting a 2.5" leveling kit. So were looking at around 5". I know its going to be tight, but im not sure. I only had 32 on my last truck and it just didn't seem big enough

 

3" pro comp lift + 2.5" level kit.. is that 2 spacers on the front to give you the 5" of lift?

 

Stacking lifts is bad, mmmmkay. Really, don't do that. Go with a proper lift.

 

yea they are just strut spacers in the front and blocks for the rear.

 

You need a drop bracket kit of you are going over 3" of lift.

 

I'm no expert but from what I've heard on here combining two different lifts is not a good thing. Maybe you should just go with a 6" kit.

 

I have spindles plus coilovers and fiber glass front fenders and still rub the cab mount and that is with it chopped as far as safe.