New England B.S. Thread

Im thinking about re-doing my sliders with awlgrip, but only because i can get a awesome deal on it. And even though spray paint is easy to touch up, i never get around to it.

 

Nope the bed had zero rust

 

I thought the same thing with my 95 when it came out of the shop after getting rear ended. Those fuckers welded on a whole new quarter panel... Meh, rust showed up, and the liner was sprayed on at the same shop right after the work was done. Doesn't mean shit.

 

That looks aweful thin to have been done by a professional shop. It looks more like the stuff that is DIY and comes with a roller. My Rhino liner and Speed line where prob 3/16" thick, the speed liner was supposed to be reinforced with kevlar. That being said both had tears in them from regular home owner use

 

Well my lift is finished. I did the fronts on tues after work and the rears last night. The rears were a lot easier than the fronts by myself. I will get measurements later when I find a level spot. The truck tracks good but the alignment has to be off. I will try for alignment on sat am it feels like camber is off.

 

And then we mod!

 

Soon as you show up. I want to hear how your truck has more low-end torque

 

Now that you have your lift installed, you need tires.

 

Idk. It's an expensive science project/experiment at this point. We will see if it actually works

 

True but I will wait till these are dead

 

^minor trimming needed

 

What the hell would those things go on? Imagine the mounting and balancing? Lol jk

 

Ya but whatever your loaded. I figured by the time he is back on the 9th some people will post up some results and I can make a decision then. I asked him about how to pay but he never replied

 

Ya instead of ounces it would be pounds

 

http://www.tacomaworld.com/forum/2nd-gen-tacoma-marketplace/284128-stuff-sale.html

Any input on this TRD intake?

 

I won't lock it, i promise.
I used to do the same shit without the locker,it just doesn't take 5 tries to do it anymore.

Are those an M/T or an A/T?

 

Let me un plug air. Then sure.

 

Last few times i went out the compressor was down and i did all right without it.

 

Pics or it didn't happen.

 

X2