Kavik's She-Devil Build

Hmm...I will have to look at it, like I said the previous owner of my truck was in the process of lowering it before he shipped off, so it is possible it has drop coils and maybe even more.

 

I agree cuz 3 inch blocks u be pointing up cholo style
I think u got a coil on em or possible a cut stock one haha take some pics can help u out

 

I will have to this weekend, I never really thought about it since my ass was always in the air lol

 

when i put the rear 3 inch blocks on mine before putting my drop coils on, the lights were pointed upward

 

ok, here is a couple of pictures I took. Looks like the coil has some markings but I can't make them out.

 

from this angle that is the stock markings and stock coils but looking at youalignment bolts on the lower control they look maxed out like mines and your lower control arm is level on the stock truck the point slightly down same with the upper arm it looks closer to the coil than stock

measure from the senter of the rim up to the fender and post the measurement stock is like 19 1/2"

alos if you jack the truck up letting everything droop do you notice if the coil is a little loose
it could be me but to me u look lowered

 

I will get more in depth pictures when I change my oil this weekend.

 

I just noticed I posted one pic twice, here it is from the other angle,

 

I bet ur stock springs are cut!

 

That was my guess... either cut, or heated with a torch.

 

Bro!!! Show mw the spindle from the bottom left corner of your last pick I can see you got a spacer there at least to my eyes that's what I see cuz your coil actually doesn't look cut cuz.my friends is cut.and. looks different but I think you got like 1.5" spacers

 

I hope that is not the case, I would have to get new coils if they have been heasted

I will get a picture today and hopefully we can get to the bottom of this mystery. lol

 

Yah I see what Brendo is talkin bout. Looks like theeeee of a spacer in ur pic

 

Alright, here is a different angle.

 

Yup spindle spacers. Either 1-1/2 or 2 inch

 

Looks like it.

 

Oh hell yes... that's a huge spacer.
Be very careful if you change rims... no way you can go smaller than what you have without hitting that ball joint stud.

 

I have always thought that was way close to the wheel for comfort, at least I know why it is that way, makes me wanna dive into the front suspension.

 

But in other news! Satoshi grill progress. Almost time for some paint and mesh

 

Make me a satoshi! I'm not happy with mine from one of the members I won't say names lol