Dirt Designs 05+ Taco 4WD RACE kit

Thanks everyone. It should work out well

The spindles do not add any to the overall width like a 2wd lift spindle. So its a total 3.5" per side.

The tabs? Or the uniballs? The uniballs are high strength 1in. Same as most kits out, even on some TTs. And Ive had similar tab layouts that ive built on other vehicles with other kits. Itll be all bueno

Price will be around $4-4500 for upper arms, lower arms, spindles, heimed steering, and all necessary parts (minus shocks and glass)

 

Not as many pics as i hoped, but I will hopefully have shocks and steering clevis' friday


Kit cycles 14.5 from inner fender to cv bind (will be bumped and strapped right around 14). The shock will be setup to cycle the suspenison up past the inner fender by 2-2.5in so if joel ever decides to remove them, he can run around 16" of travel



There will be some sheetmetal massaging to fit a 35in tire at full bump and crank. We should be able to just roll over the weld seam and that should be the clearance we need.

 

Badass...is your first gen linked?
Looking forward to the test run videos. Way to put worth the effort and design that 4wd spindle.

 

Hmm I like.. Need to start saving

 

This looks nice.

 

Subbd

 

I'm diggin the fact that there isn't too much camber change

 

option for heimed uppers?

 

yessir and thank you

Definitely should be

 

subbed

 

Sure.

Ive been welding up parts so its getting closer to better pics. Both uprights, ucas, and one lca are done. Tomorrow im going to be setting up the steering and shocks

 

Do those spindles add any sort of lift? Is that even possible with 4wd spindles?

 

Subbed

 

looking thick, solid, tight. I wouldnt even want anymore lift with an LT kit. 2nd aftermarket 4x4 beefy spindle(to solo motosports) available.

 

Not possible with 4wd

 

hahahahaha

 

Yep you are correct. This is the first spindle that uses stock hubs, brakes, speed sensors, and cv joints.

 

pass side




driver side




needs some steering

 

good selling point.

would def be interested once the money falls from the sky

 

this is some pretty impressive stuff.