SCS Stealth 6 wheels 16x8 & 17x8.5

Would I be able to mount a set of 265/70/17 on these rims?

 

265/70/17's Terra grapplers, no problem at all

 

Specifically the general grabber at2

 

If you are already running 70's then there should be no problem with these, these do have 2.2 inches more of backspace on them, you don't have any lift do you?

 

Currently stock height 12 dcsb sport. Looking to replace stock rubber with the grabber at2s. Then one day replace stock rims with these SCS rims. Also a 2in ome lift one day

 

I wanna say you'll be fine, the only spot that MIGHT have an issue would be the front flaps I THINK, could use some input from other members and or Vin.

 

If its just mud flaps I will have no prob trimming them


Thank u. This is going to be a step by step process when cash is available

 

I'll try to remember to check lock to lock tomorrow, I'm up 1.75 but it should be pretty much the same

 

Ya your right. There has been a few guys at stock height with these wheels and 265/70/17. Gatta lose the front mudflaps, and a little trimming inside the wheel well possible.

 

the grabbers are basically the same tire as the BFG KO's i am running. Remove mud flaps in the front and trim a bit in the wheel well. Took me about 30 mins to do. -

 

Hey man, noticed your comment.. Those are the exact tires I'm running with my Stealths. General Grabber AT2 265/70/17, Stock suspension right now.

Everybody's been right, you will rub on the small little front flaps and the regular ones. I also had to cut the bottoms of the fender flares at the bottom, at an angle. I'm still rubbing just a little ( on the inner fender closest to the cab , roughly a quarter to a half inch contact area, if that, just depends on weight distribution, and there's times it doesn't rub ) when at about 90% turn. I've been meaning to do address it, just haven't.
Btw you should like the AT2's, I have, they ride good, not loud, don't wander, and look sweet with Stealths.

 

Great advice everyone. Removal of your mud flaps and some minor trimming is all it takes. At stock height, 265/70/17 really helps to fill up the wheel well nicely. You can always PM me with specific questions. It's easier to keep track b/c sometime I miss a question here and there within all the posts.

 

Yeah uhuh, we're doing yer work for ya buddy

 

Ya, now sponsor us

 

You will need to get an approval from RJ.

 

So i just need to jump my truck farther and higher than him, no problem

Who has some really good photoshop skills?

 

Yes!!!

 

Great, that's just step 1 of our recruitment process. Once you complete that, we can move forward. Round 2 is Krish's territory.