1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Daayyuuuuummmmm.....

Discussion in 'Suspension' started by dud122, Jun 28, 2009.

  1. Jun 28, 2009 at 6:31 AM
    #1
    dud122

    dud122 [OP] rabble rabble rabble

    Joined:
    Nov 7, 2008
    Member:
    #10566
    Messages:
    2,062
    Gender:
    Male
    First Name:
    Dan
    Riverdale Park, MD
    Vehicle:
    2004 Tacoma DC
    OME up front, Dakar in the back, Elite front bumper, Warn winch, Tactical rear bumper with tire swing/jerry cans/hi lift, Revenge Fab. sliders, Tundra brakes, Camburg UCA's, Safari Snorkle, FJ TRD wheels, Lights, CB, Switches, skids, LED's... OH MY!
    i have called 6 different shops to see what they would charge to get my camburg uni-ball UCA's installed and the cheapest quote i got is 247.50 for 2.5 hours labor!!!!!

    am i missing something here?!?!? isn't it basically 1 big bolt and pressing in the spindle?
     
  2. Jun 28, 2009 at 6:33 AM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,502
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Nothing needs to be pressed in. Remove the UCA bolt, and the ball joint bolt on the spindle. THEN, put new arms in place, re install UCA bolt, and tighten Unibal nut on the spindle to between 87 and 99 ft- lbs.
     
  3. Jun 28, 2009 at 6:38 AM
    #3
    dud122

    dud122 [OP] rabble rabble rabble

    Joined:
    Nov 7, 2008
    Member:
    #10566
    Messages:
    2,062
    Gender:
    Male
    First Name:
    Dan
    Riverdale Park, MD
    Vehicle:
    2004 Tacoma DC
    OME up front, Dakar in the back, Elite front bumper, Warn winch, Tactical rear bumper with tire swing/jerry cans/hi lift, Revenge Fab. sliders, Tundra brakes, Camburg UCA's, Safari Snorkle, FJ TRD wheels, Lights, CB, Switches, skids, LED's... OH MY!
    i've heard that it can be a HUGE PITA to get the stock UCA off... to the point where people were cutting it, using hot/cold treatments...etc. may be too much to try and do "real quick"????
     
  4. Jun 28, 2009 at 6:40 AM
    #4
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,502
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    I havent heard of these issues. I would think the worst case would be to simply loosen the body mounts, and jack the body off the frame a couple of inches to get the clearance.
     
  5. Jun 28, 2009 at 7:21 AM
    #5
    Fire931

    Fire931 Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    got some wrenches, sockets, torque wrench and a jack?? if so then have at it.... its really simple...
     
  6. Jun 28, 2009 at 7:34 AM
    #6
    Brunes

    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,562
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    Prolly spot on-100 bucks an hours for labor. 2.5 hours. Adds up to me.

    It's not SIMPLE to take them off...but it's not doctorate degree thesis either. I used the "bend the sheet metal" technique...Worked out great.
     

Products Discussed in

To Top