Help! Installing Spacers

I will be installing my 3Inch spacers this weeekend and i wanted to see if anyone knew where i could find a good write up with pictures.? Thanks for the help..

 

Spacers are soooooooooooooo easy to install.

1. Jack up truck.
2. Take off wheel.
3. Bolt spacer to hub.
4. Bolt wheel to spacer.
5. Lower truck.

Just remember to torque the lugs to the required ft. lb.

 

I think he is talking about a spacer lift, not wheel spacers

 

x2

 

thats simple

1. jack up car
2. remove front tires
3. remove sway bar mounts and remove from spindle
4. remove 3 top nuts on the shock
5. remove the lower shock bolt
6. remove shock
7. install spacer
8. put everything back together

 

Haha, my bad. I guess I should have read it fully... 3 inches. Wheel spacers don't come in that size (unless you want to die)

Duh.

 

Parks Offroad write up:

http://www.parksoffroad.com/tacomamods/tacoma05/tc05taco3in/tc05taco3in.htm

 

Thanks..

 

Good luck. Post up so pictures when you get done. If you never used spring compressor...I would pay the extra to have them put on. It can be very dangerous.

 

but remember that the bolts are staggered, you'll have to turn the top so the shock remains as it was.

 

Holly thread revival.