What have you done to your Tacoma today? 1st Gen Edition

made fill in plates for my trail gear bumper! got before an after pics on my build thread

 

This is good to know. Since the truck is becoming more of a trail rig, considering going back to the KM2s.

 

Turned my Wheeler's 5 packs into 6 packs.

 

That is a very nice colour.

 

Yeah the old man tan, I mean, Mystic Gold Metallic is kinda growing on me. The origianl MGM I guess you could say.

 

Finally mounted and wired up the Blitzpro 15S that I won quite a while ago

 

truck is looking sweet, man

 

Thanks Madjik!

 

Question for anyone who has their exhaust hacked after axle: Do you need to relocate the hanger? Or is the pipe welded onto the muffler sufficient to carry its own weight?

 

made it a build page!
http://www.tacomaworld.com/forum/1st-gen-builds/289791-frankenstein-build.html

 

The Taco starting making a new tick today

 

I didn't do anything with a hanger and mine is just fine "hanging" there. It doesn't move.

 

I'm just about to do this, I have my templates cut out. I'm curious though, did you weld flush with the top or down a bit?

 

hot damn RMAN!

 

Is that the Wheeler's AAL specifically for adding to their 5-pack?

Does it go on the bottom (above the overload)?

Also, it doesn't look like you've used a BPV relocate bracket. Were you able to adjust the threaded rod enough instead?

 

Used it

 

got a couple more things for the amp install.

 

its down a bit. about half way an tacked it on while its on the truck so you know it will fit then take off an wheel an grind haha

 

if you goto mu build thread its on there

 

Yes its the wheelers AAL designed specifically for their leaf pack.

Unless I did it wrong, leafs should go from longest to shortest, so yes, the AAL would be just above the overload.

And BPV relocate is next on the list. I adjusted the threaded rod all the way up, which worked fine for the 5 packs by themselves (with all the weight I carry) but is probably not high enough now.