AZ BS Thread 2.0

I know you do for sure man, ive seen your build and you have had worse problems than I have.

 

It always works out because its a Tacoma! Check an see if your hard lines have a leak

 

How much you want for it?

 

If you aren't seeing brake fluid dripping/leaking anywhere, it would probably be the master leaking into the booster. If you can't find a leak, loosen the master enough to give a gap but not to let it fall off and see if brake fluid leaks from the booster.
Side note: installed air ride bags on the truck with an automatic leveling system, and a pair of airhorns with tank/compressor combo.

 

Don't do what he said, just tell me how much you want for the truck

 

Found out the problem. My brake booster went from max to under minimum as of last night.

What part is this?

 

Looks like you broke the steel line when you bled down the system!!

 

^Looks like its coming out of the line where it goes in the caliper, that has a terrible angle on the metal part of the line right where it goes into the bolt on the caliper

 

The bleeding is up top and nothing comes out of that when you bleed the brakes. It was already like that when I bled the brake. I sat under my truck and hit the brakes and just saw fluid come right out. I just dont know what in the hell you call that.

 

Looks like the hardline is not screwed in tight. There is nothing in that picture that shows fluid is coming out at the top.

 

Ahh.. there's yur problem....































Sway bar is still on.

 

This is what I am saying, either the hardline is loose or you fucked the harldine up because its such a massive angle going in the bolt. Either way I am willing to bet the problem is that hardline going into the caliper, that is the highest point that its leaking in your picture

How dirty were your hands when you did all of this? Even the slightest bit of junk on the sealing surface of that hardline will keep it from sealing right

 

One thing is stop driving the truck until you fix it, your going to kill yourself driving with a brake issue like that

 

When the brakes are bled it comes off from the top which has nothing to do with that brake line. Anyways I havent unscrewed that bolt maybe since my spindles? (which was around a year ago) I dont even think I ever unscrewed it honestly.

Edit: I went back out and looked again, it is screwed all the way in. It is leaking out of the metal.

 

But since you are missing the retainer in the spindle to hold the brake line every time you turn your steering wheel it is flexing on that line right where the bolt is. I am not sure what you mean leaking out of the metal, the brake line or the caliper (the caliper is the part the line is going into)?

 

Its leaking where it goes into the caliper where it has that bend. Im pretty sure that line doesnt move that much if at all, because I can barely bend it my self.

 

This is a brake line and how it seals, Tacoma may be a little different shape but same principle. Since yours is all bent to shit right at the bolt I almost guarantee as it flexed around you ruined the shape of the end and now it leaks

 

Nicholas, use your big boy words. Saying metal over and over does not denominate which part is leaking. The hardline is cracked. Should be able to pick one up from checkers fo cheap. Call them and order it and stop driving the truck.

 

Yes exactly. I think they were already like that honestly. Ill look at my moms 4runner and see what those look like.