Custom auxiliary fuse panel FS thread

tooblutacoma06 · Aug 23, 2013

Bigbenny said: ↑

PMd
Click to expand...

Working on responses to PMs tonight/tomorrow.

To verify fitment with 2013s, does anyone have a picture available of that region of their engine bay? I have sold a couple to some 2012 guys but not sure if they changed it up for the 2013s.

tooblutacoma06 · Aug 23, 2013

tooblutacoma06[OP] said: ↑

Working on responses to PMs tonight/tomorrow.

To verify fitment with 2013s, does anyone have a picture available of that region of their engine bay? I have sold a couple to some 2012 guys but not sure if they changed it up for the 2013s.
Click to expand...

Actually, eazyrider711 was kind enough to send me a couple of pictures of his 2013. The space looks exactly the same. Can someone now just verify that their measurement between the two fender mounting holes is 3 inches?

csjumper2003 · Aug 23, 2013

tooblutacoma06[OP] said: ↑

Actually, eazyrider711 was kind enough to send me a couple of pictures of his 2013. The space looks exactly the same. Can someone now just verify that their measurement between the two fender mounting holes is 3 inches?
Click to expand...

Ive got some pics of the atrac, 6speed one that I have and has a 12 fuse pos and negative terminals, and a 150 breaker just need a better made one

csjumper2003 · Aug 23, 2013

Here is a 2011 6spd atrac one that was made just need a better quality one made

warren84 · Aug 24, 2013

tooblutacoma06[OP] said: ↑

Unfortunately the answer to this question is still no. The clutch reservoir takes up so much additional space it may not even be possible to add a 12 gang box. With my current ATRAC panel design (for autos) there is not much extra room at all on the panel due to the ATRAC electronics taking up some space. Having the truck available and looking at the space there, do you think you would be able to fit a fuse box and a breaker in that space? There are a couple of pictures of the ATRAC panel on pages 12 and 13 of this thread. You'll see what I mean about the lack of space caused by the reservoir. Although having never had the opportunity to see the space in person I may be wrong.

I have not gotten all of the measurements I would need for a first gen model. If someone could PM me about it we can work through email to come up with a design though.

I just looked through all of my PMs and I did not receive a message from your username. Did you send it under a different name or something?
Click to expand...

I hope not. I can't see my sent mail! Crap!.. Can I still purchase the plate and not have to wait in line again?

Bengland25 · Aug 26, 2013

tooblutacoma06[OP] said: ↑

Unfortunately the answer to this question is still no. The clutch reservoir takes up so much additional space it may not even be possible to add a 12 gang box. With my current ATRAC panel design (for autos) there is not much extra room at all on the panel due to the ATRAC electronics taking up some space. Having the truck available and looking at the space there, do you think you would be able to fit a fuse box and a breaker in that space? There are a couple of pictures of the ATRAC panel on pages 12 and 13 of this thread. You'll see what I mean about the lack of space caused by the reservoir. Although having never had the opportunity to see the space in person I may be wrong.
Click to expand...

I actually currently have a panel in there that holds a 6 with neg bus and a circuit breaker. It's definitely possible to get a 12 in there.. The one I have now was made by a friend that isn't doing fab work any longer. I could always make one myself but I wanted to see what you'd be able to do for me. Here is a picture of my current setup.

tooblutacoma06 · Aug 26, 2013

Bengland25 said: ↑

I actually currently have a panel in there that holds a 6 with neg bus and a circuit breaker. It's definitely possible to get a 12 in there.. The one I have now was made by a friend that isn't doing fab work any longer. I could always make one myself but I wanted to see what you'd be able to do for me. Here is a picture of my current setup.

Click to expand...

Thanks for posting your set ups guys! This is something like I was considering. Were the mounting bolts hard to get to on the one pictured above?

Also, I have added/edited information in the OP to reflect prices and options.

I'll be working with my laser guy in the next day or two to get an order put together for the current designs.

Thanks again for yall's support!

Bengland25 · Aug 26, 2013

tooblutacoma06[OP] said: ↑

Thanks for posting your set ups guys! This is something like I was considering. Were the mounting bolts hard to get to on the one pictured above?

Also, I have added/edited information in the OP to reflect prices and options.

I'll be working with my laser guy in the next day or two to get an order put together for the current designs.

Thanks again for yall's support!
Click to expand...

No it was actually quite easy to get to the bolts. Just gets harder and harder as I get more wires running underneath there haha

please let me know if your going to be able to put something together for the manual guys. I can get you measurement inside the engine bay if you need them.

Also, you think it would be possible to make one up with one of the sides folded down on a 90 degree angle to allow more relays to be mounted??

02tacoSR5 · Sep 1, 2013

Interested in one for a 2013. Keep us updated on the fitment.

tennisbum132 · Sep 3, 2013

Interested in one for a 2013 Sport DCLB with slits like MikeyMcFly's if at all possible. Thanks!

Cpsii · Sep 6, 2013

Got mine, love it! I will post pics when I get time this weekend!

NorthRoad · Sep 6, 2013

Also interested in one for a 2013. Nice work!

Uncle Moose · Sep 9, 2013

Just curious if you still make these, I have sent PM with no response.

Any opinions on going with a Bussman 15303-5 with the built in relays over the Blue Seas with external relays??

rbraddock · Sep 9, 2013

tooblutacoma06[OP] said: ↑

Actually, eazyrider711 was kind enough to send me a couple of pictures of his 2013. The space looks exactly the same. Can someone now just verify that their measurement between the two fender mounting holes is 3 inches?
Click to expand...

Yes it is

ramonortiz55 · Sep 16, 2013

I believe I sent a PM a few days ago,

I am interested, are you still making these?

tacomonazul · Sep 16, 2013

tempting..

05Aztacoma · Sep 17, 2013

cstallings · Sep 30, 2013

I assume you can ground relays to this? It looks like some pics show relays being grounded to this.

TacoTues · Sep 30, 2013

Installed mine. Came out great.

Voodoo Rufus · Sep 30, 2013

How are you guys getting it to install nice and flat? Am I trying to put the brace in the wrong spot?

Log in or Sign up

Welcome to Tacoma World!

Custom auxiliary fuse panel FS thread

#261
tooblutacoma06 [OP] Member

#262
tooblutacoma06 [OP] Member

#263
csjumper2003 Jumper's Leds Vendor

#264
csjumper2003 Jumper's Leds Vendor

#265
warren84 Well-Known Member

#266
Bengland25 Never Forget! 343

#267
tooblutacoma06 [OP] Member

#268
Bengland25 Never Forget! 343

#269
02tacoSR5 Member

#270
tennisbum132 Well-Known Member

#271
Cpsii Well-Known Member

#272
NorthRoad Listen More that Speak... Answer When Asked

#273
Uncle Moose New Member

#274
rbraddock Well-Known Member

#275
ramonortiz55 Not A Well-Known Member

#276
tacomonazul Well-Known Member

#277
05Aztacoma Well-Known Member

#278
cstallings Well-Known Member

#279
TacoTues Well-Known Member

#280
Voodoo Rufus Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

Custom auxiliary fuse panel FS thread

#261 tooblutacoma06 [OP] Member

#262 tooblutacoma06 [OP] Member

#263 csjumper2003 Jumper's Leds Vendor

#264 csjumper2003 Jumper's Leds Vendor

#265 warren84 Well-Known Member

#266 Bengland25 Never Forget! 343

#267 tooblutacoma06 [OP] Member

#268 Bengland25 Never Forget! 343

#269 02tacoSR5 Member

#270 tennisbum132 Well-Known Member

#271 Cpsii Well-Known Member

#272 NorthRoad Listen More that Speak... Answer When Asked

#273 Uncle Moose New Member

#274 rbraddock Well-Known Member

#275 ramonortiz55 Not A Well-Known Member

#276 tacomonazul Well-Known Member

#277 05Aztacoma Well-Known Member

#278 cstallings Well-Known Member

#279 TacoTues Well-Known Member

#280 Voodoo Rufus Well-Known Member

Products Discussed in Entire Site Forum: 2nd Gen Tacoma Parts Marketplace (2005-2015)

#261
tooblutacoma06 [OP] Member

#262
tooblutacoma06 [OP] Member

#263
csjumper2003 Jumper's Leds Vendor

#264
csjumper2003 Jumper's Leds Vendor

#265
warren84 Well-Known Member

#266
Bengland25 Never Forget! 343

#267
tooblutacoma06 [OP] Member

#268
Bengland25 Never Forget! 343

#269
02tacoSR5 Member

#270
tennisbum132 Well-Known Member

#271
Cpsii Well-Known Member

#272
NorthRoad Listen More that Speak... Answer When Asked

#273
Uncle Moose New Member

#274
rbraddock Well-Known Member

#275
ramonortiz55 Not A Well-Known Member

#276
tacomonazul Well-Known Member

#277
05Aztacoma Well-Known Member

#278
cstallings Well-Known Member

#279
TacoTues Well-Known Member

#280
Voodoo Rufus Well-Known Member

Products Discussed in