XPOTRPR build & BS

I have never used fiberglass before though..

 

I didn't even use fiberglass.

Check out my first page. Should have a few pics of how I made it. But.. nonetheless... fiberglass really isn't difficult to use. Especially with the small area we are talking about.

 

will do thanks for the help as always

 

Of course man.

 

how I feel

 

So what was up with your vibration up front?

Just trying to make a list of thing i will most likely need to pay attention too...

I still have that weird clunk up front when off roading, and getting some steering vibes these days.

 

I got some hub centric rings for my wheels a couple months ago. They fixed my vibes I was getting from my wheels being lug centric instead of hub centric. Turns out.. I lost one recently off the front left. At the dealer.. discount.. somewhere. Put one from the rear up front.. fixed. Ordered another set and will be here Friday so I can add one to the rear I borrowed. No mas vibes!!

Gonna hit up firestone tomorrow again and see if they can dial it in even more as it pulls right.. and has some camber issues.

Also.. finally got around to some more trimming of the fenders.. would always rub the front and rear of the front fenders when wheeling. Was even worse after the alignment since they moved the spindle forward. would rub the front just turning. So a dremel and 30 minutes later.. finally have plenty of clearance now for wheeling.

 

Keep in mind some of that pulling could be tire wear, even though they're new it doesn't take much to them slightly out of spec and need to re-wear a bit.

 

Thanks man. Im gonna go in today and see what they can do. I do have some positive Camber that I would like fixed and could be the cause of the wandering sensation.

 

dafuq? why is that side like that?

 

Does the the black mesh block any of the light ??

 

Both sides. That's the Camber.

Not really. I never really use em anyways.. as the retros and HIDs outshine the Hella's. Lol. But.. regardless. No.

Im gonna be ditching the Hella's here soon since ill have a Raptor grill.. and ill go with an LED bar

 

"PARTYTIME!"

 

soon my friend less then 24 hours .

 

What time you headed out?

 

Thats really rough was it bad before you got the new tires? and LED Bars for the win Im getting in on that group buy so whenever I get my grill done I can put it in.

 

we are headed out like 3ish not soon enough cause of traffic :/.

 

No, alignment was good prior.. but I also adjusted my UCAs this time around to gain some more clearance at the back of the fender.. which MIGHT be the cause of my issues. Going in today and gonna lay it all out on the table. Might just have to set them back to what they were.

Yeah. I hear that. We wont be leaving till about that time too. :/ Gettin in around 6pm