Alabama thread!

Yeah, after looking at it for a while that was kinda what I came up with, as far as turning the ring sideways and then stand on the tire. Didn't think to lubricate it though, durr da durr... Definitely can't get it to rotate without lubricating it.

 

FIFY!

 

Haha....... GAAAAAAAAAAAAY

 

hey Paul, what electric impact do you have?

 

Ok, so...I'm gonna touch base with Bill to get my interior lighting done when I get home. Still gotta figure out what color combo to go with. Now to my next phase. I ordered my katzkins leather but I am not about to attempt to install that at all. I called auto trim design in Montgomery and they quoted me 450 for the seat install. Does anyone think that is too high?

 

Is this for the 2 front buckets and the back? I think you are looking at at least 6 pieces of leather to put on if it is.

Would I pay to get it done? I think I would take a look at doing one piece and make that determination after a in-depth look at the job at hand.

 

milwaukee 2663-20

http://www.milwaukeetool.com/power-tools/cordless/2663-20


which is being replaced by this one in the fall

http://www.milwaukeetool.com/power-tools/cordless/2763-20

after all my research, this one is the most bang for the buck. I suggest buying it and batteries seperate, comes out a lot cheaper that way. I've got an extra charger I'll sell you for cheap if you want it.

However, if you just want something cheap, the kobalt one is pretty good for the money. I haven't found a bolt that needed more than 300 ft-lbs of torque yet. I had a tough to remove pinion nut and the kobalt yanked it right off no problems.

 

OH BRIAN!!!! i has a question.....pm sent

 

Yeah, it's for the front and the back. I might try that. Gotta give it some thought.

 

Answered!

Good luck and let us know which why you decide.

 

since I won't be doing any major wheeling anytime soon. i think i am going to go with the All-Pro IFS skid plate, then the transfer case and transmission skids. if possible get the dif skid as well. i am also looking into a bed rack so i can mount a CVT tent(next february)

 

I didn't know kyle got a job in auto parts, but he's clearly in the naming division, because here's one of his oil filter wrenches:

 

Selling my Yakima rack if any of you guys are interested
http://www.tacomaworld.com/forum/2nd-gen-tacoma-marketplace/293151-fs-yakima-roof-rack.html

 

Sent this to my buddy. I think he's been looking for one

 

http://www.tacomaworld.com/forum/2n...-camburg-1-25-uniball-uca-icon-coilovers.html is this a good price?

 

Coilovers alone new are about $900-$1000 if you can get them on sale, so that'd not too bad. Built Right Coilovers were $500 new, I think camburgs are a little more, like $800 maybe?

I think you're getting something like $1700-$2000 worth of hardware if it were new for $1100.

 

sweet!! if he ships then i will hold off on the ARB and snatch these up and then do the rear.

 

ah he sold them....dammit

 

since no one else commented on this, I will. I definitely laughed out loud.

 

are you laughing at the part number "asstoy640"?