Oahu Members Thread

That was me, Nate

Yeah I did everything myself.. And I tied it into my cargo switch. But my offroad lights are controlled by switches in the blanks.

 

sigh...
just ordered a Warn M8000s

 

day 2 of trying to install the diff skid....mod to the front top bracket works, but rear brackets don't fit because of oem weld beads on the axle...have to grind those off and paint and then maybe can install it

 

Nice. Can't wait to see your transformation.

 

Got some radio equipment, and my Call was posted on the FCC site today. WH6EGL

 

Few bucks more u could have gotten the 10,000s

 

Which radio you running? I got a Kenwood 742 tribander radio. Congrats on license.

 

Thanks. I hit the Salt Lake Repeater earlier for my check in, talked to KH6BZ I think he said. I'm just using a

$40 BAOFENG UV5R Dual Band 3800mAh Rechargeable Two Way Radio Walkie Talkies for Adults with Earpiece,Speaker Mic and Programming Cable Full Kit (Black-1Pack)

BAOFENG UV5R handheld with a Nagoya 40cm whip.

 

I actually threw in a "few bucks more" to upgrade from the VR8000s
And I could barely afford that one!

BTW, anybody know anything about Toyota side mirror wiring?
Trying to fix my neighbors sequoia. Got a cheap aftermarket replacement mirror, but it has the wrong plug. I was gonna try to wire up the 3 wires for power adjust. Not sure which ones are which on the harness. Stock plug has like 8 wires. OEM had power folding.

 

I think they still have a nightly net on the diamond head repeater 146.880 at 1900.

 

I could do some digging for a wiring diagram, i'm assuming all the model years are the same?

 

Did the OEM have an integrated signal? Probably heated too

 

1930 actually, but I couldn't get a good connection with my handheld

 

Did you go through Amazon?


If Oahu members are still interested, mod day sat sounds good to me... I'd like to see what is giving Luka a hard time on his BAMF diff skid, cuz i'm about to buy one.

 

I think the trouble i'm having now was part of the required grinding to install it, but it might not apply to all years. should be a quick zip with an abrasive disc.

 

What sux is when they don't tell you, I just installed my Relentless fab front bumper last weekend and found out the hard way that I had to grind off the Tie down hook on the driver side bumper frame mount. Easy compaired to doing my leaf packs by myself though...
Your rig is looking good, I'm very impressed with your conversion. Unfortunately I sold my 2007 Sport Prerunner and bought at 2010 4x4 TRD OffRoad, but part of me wishes I attempted what your doing...

 

I vaguely remember reading something about some minor grinding.

When I installed the Pelfreybilt bumper, had to grind off some excess weld beads for it to sit correctly aginst the frame. Happy it's all minor stuff.

Looking back from today, I might have spent more on the conversion than if I would have bought it new, but just barely.

I guess I got lucky with my year too, don't have to worry about a lot of the extra electrical stuff on the newer trucks getting in the way of using 4wd.

 

Solid. When you do any of your wiring where do you bring it in to the cab? I've seen people bring their wires in through the grommets under the seats or through the engine compartment wall. I know little to nothing about wiring a car up, never done it before.

 

Yo just saw a sick pic of Shane Dorian's Taco, thought I'd share. Check 'em out!


p.s. GO BOWS!!! CHEEHOO!!!

 

I cut a small slit in the firewall grommet for my amp wiring just after I got the truck so I run most of my wiring through there. I try to keep what I can under the hood and only run switch wires in, but I still have a lot of wires running into the cab..