New England B.S. Thread

Here's the best of what I got in ME. Unfortunately, my camera wouldn't read the SD card I picked up so I was limited to what I could shoot with it and I tend to forget to grab my phone, plus some of the Kodak moments were so fascinating that I just got lost in them...
My visit to the breeder in Winslow Friday:
New babies:


JUNO (left) and MAIA (right--my dog's mom):

Tango (my dog's dad):

My roomie (aka Gandalf) testing the furniture:



The bed won
Waiting impatiently to hit the trail:



Erik, Denis, Erik's ride-along (sorry I forget his name) and I believe Chris behnd Erik:

Denis and Old Farm Rd:

Mudhole (Rob visits later):

Rob's DIRTY hood post mud hole:

Rob threading a needle--tree one side huge f-in rock other:

Chris waiting his turn to thread same needle (I backed out of this one):

Me flexing

Me finding my own route (while Rob abused Chris ) about to thread my own needle between 2 tightly placed trees:

And lastly, I came home with bronze wheels :

 

Nice vids Denis You captured my moment of glory perfectly .
It actually sounded a lot worse inside the cab. Nothing major just a couple bumpies on my protection.
I shoulda taken another run at that I could've had it. Another time...
And theres Rob taking a mud bath

 

Nice pics D! These make the trip and erase my goof on the ledge

 

No biggie

 

Cam,
my main mistake was turing on the lockers, instead of sticking with 4 lo and letting the ATRAC work some, they aren't made to go over a certain speed and I think I stalled when I came over the first step and headed into the 2nd part. Going to rework my pedal set up to make it more secure on these inclines.

 

my second one (OEM) lasted under 5k miles

I bought the one ton. I have an idea how to build an adjustable mount. Gonna attempt it this Friday. Thinking 24" piece (I will measure what i need first) of angle iron to mount under the crossmember. turn the one ton upside down so it slides up in the current mount spot. drill 4 holes in the angle iron then shim adjust for angles as needed. if i need to move the CB up more I can cut a 2 in stripe of my Stall mat I use as my bed mat and drill the holes to make it a spacer.

 

Nice! Great looking color matched grill you've got there Billy. Now come over my house and make my truck as shinny as yours.

 

Horny Taco

 

After seeing that mud hole video it may take a long time

 

I installed with the factory emblem and it looked off cause I have had the horns for awhile now

 

Here you go rob

http://youtu.be/upF8buj6o98

 

Huh, so I'm confused with the pedal setup you have. Is it gas on the left and brake on the right? Anyway man, glad your truck is ok and you weren't hurt! These tacomas are pretty darn tough!

Do you have front and rear lockers?

 

x2, not following the 'pedal setup' comments, figured I was just being dumb...

 

Erik, I hope you don't mind me saying anything.

He was in a bad motorcycle accident and had to have part of his leg amputated. He uses a attached pedal set up so that he can drive with his left leg.

I'm sure once you get the pedal set up secured properly and get used to your truck you will be able to handle obstacles like that hill with no problem.

 

I need a spare tire 265/70/16 or 265/75/16 if it comes with a wheel even better . Please pm me a price and info .

 

Everthing is juuuuuust fine

 

Thanks Erik.

 

John, u see this??? http://forums.exploringnh.com/showt...chelin-LTX-on-steel-Toyota-wheel-100-tread-20

If you don't I will.....