Show off those aftermarket stereo systems!

Damn! Can't wait to see the finished product.

 

Me toooo

 

Got some more pics. It's getting closer!! I saw the door panel design sketches, and they're going to be awesome! There were three batteries up front, now they are taking out the spare tire and building rack for the batteries there.

Here's what the outside looks like as of yesterday



The amps will be lit with blue LED's and the On the Go Audio logo will be lit up blue as well



Where the A/C controls are going



Here's the motor that will push the iPad out, I'll also post what the piece that holds the iPad looks like.






Here's the not so shallow 12 inch Memphis Mojo

 

Really been thinking lately of replacing the stock speakers. I figured I would use a three way 6x9 up front and maybe some components in the rear. I was looking at what Cruchfield had and now I have some questions. It seems that most of the components come with external cross overs do I have to use them or can I just replace the back speakers with the components and be done? I do plan on replacing the stock receiver with one of the new app receivers with GPS. Thanks in advance for any and all help.

 

I got my eyes on the Kenwood in dash GPS system.... but unsure if i really NEED one lol
Whats the difference between these 2 guys?
DNX570 AND DNX690HD

I am not a audio freak... just want a better headunit with GPS thats all lol

 

@killianeric, those are some deep bastards!!! Looking good!

 

Yeah they are! My brother still has some leg room and he is 6 foot 3. And thanks! It should be done by the end of the month

 

Dont know if I posted up in here or not with my install, have had the amps since 2006 and the Eclipse since 2009, the rest I have acquired along the way.

Headunit:
Eclipse AVN-6600 GPS/DVD w/ Ipod in glovebox

Speakers:
Focal Polymer 3-ways

Sub:
Polk DB SVC 10" sealed box

Amps:
1) Memphis 300 runs the mids and highs bi mono to exclude lows and tuned at the amp
2) Memphis 200 runs the lows bi mono to exclude highs tuned at the amp
3) Memphis 1100 runs the Polk DB SVC

Wiring:
Monster 4 channel
Monster 2 channel
4-14ga for the lows/mids
2-14ga for the highs
2- 8ga for the sub
4ga from the bat
8ga from splitters to amps
connectors to line lows/mids separately at amp locations

 

Thinking about this for later on when I want to up the anty to replace the Polk since its mounting depth is pretty shallow.

http://www.techronics.com/caraudio_...bwoofer.html?gclid=CLueo8CO07kCFZRj7AodkHAApg

 

Here's a picture of the rack for the three batteries

 

Lol the money you have spent on that install could have bought you long travel, a 6lug, or an xrunner.

As for your batts What alt did you replace with to keep them charged? And whats your total draw on your electronics system to necessitate 3 batts?

 

This is actually my brothers truck and yeah long travel and more goodies. A mechman 270 H.O. Alternator. I'm not sure, I'd have to ask. I'm only on here to whore pictures since he doesn't have time

 

Jesus, a 270 for 3 amps? how much power are you consuming with those audisons? Or better yet how many LED's did you put in that cab?

 

I just texted my brother and asked. And there are going to be quite a few LED's. The door panels are going to have certain areas lit up too.

 

My brother said, "Full rms is 420 amps, and lots of LED's"

 

Hmmmmm, with those numbers looks like he's over killing it with a 270 HO alt. At 900 watts for stereo plus a misc 200 for everything else my amperage needed to run the system at 12.7 is 86 amps.

Now lets say your brothers system, with three amps, cuz I can't quite tell how many audisons he has, and an extra 280 watts for stock elec plus leds (LEDS costume a small amount I'm comparison to normal lights) he should be in the ball park of 1500 watts to run it at 12.7 volts he we need a 120amp alt to maintain.

Only reasons I bring this up are two, A) a right wond alt that produces higher storage dies it faster, even faster for those above 200 amps in a smaller configuration. And B) 270 plus three deep cell batts just seems like a hell of an overkill for this install.

If I'm mistaken in calcs please let me know but wow, Just a lot for a small install.

 

He is running three Audison amps, 2 Uno, 1 Quattro. And I honestly wouldn't know if your off. I'll ask him about it.

 

All that in that single csb, Jesus Christ.

 

Hell yeah! Nothing wrong with a stereo more expensive than the truck itself! haha

 

I guess