What Have You Done To Your 2nd Gen Tacoma Today?

What attachment did U use on the Dremel ?

 

Just a thin cone shaped stone that was in the assortment of bits I got.

 

cuttoff tool

i did this to my old corolla, and i used the flappy disk i believe 120 grit on my drill. It worked but i also am interested for the tacoma.

Would you have a picture of the finished product?

 

I had some trouble with this too but only after using an oil extractor through the dipstick hole to change the oil.

I found shoving the dipstick in and pulling it out quick gave me an accurate reading. Going slow the dipstick was just covered in oil from one end to the other.

 

Received and installed my softopper!

I'm loving it!

 

Looks really good! It's like Christmas every other week at your house! Awesome.

 

installed my new Ultra-Gauge!!

 

I seen mine has shipped. Any pics? Thanks for setting it up.

 

Not today, but I cleaned my interior and scrubbed my weathertechs on Saturday and did my diff breather relocate on yesterday.

 

I want a soft top. Which rear bumper do you have? Think it would be a good match for my ARB?

 

Thanks, bumpers are pelfreybilt

 

X2.

Red five Edtion....

 

he needs to add the droid to the familly sticker on the back window.

 

I planned on installing my new preload shims, but since i didnt feel well this weekend... I only did some more house work.

 

Finished my "Power" project. This consists of:
1. Dual Battery and Isolator
2. Aux fuse panel
3. 1200 Watt Inverter
4. 110V outlet in bed
5. Power plug for fridge/freezer
6. 12V outlet

 

Other more overdone setups:

 

For the love of pete will you make a build thread already!

 

Ditto.
I've never had a problem with mine.
Just have to look at both sides... sometimes one side will have smeared oil and the other side will be clean and give a good reading.

 

I received this little guy (Ultragauge, thanks to the group buy) and installed it