Does this relay wiring look right?

So I really want to wire in a 5-pin relay for the nice switches from t_e

I want to use one on the yellow wire mod, but when the continuity is severed the switch lights up, then when off the relay returns to normal and the connection is like normal, led on switch is off also. I am wiring to the 87a terminal because I am pretty sure continuity w/out voltage is from 30 to 87a,

Eventually I may get fancy and wire in an ABS mod also like this to another switch.

Does this look right? Forgive my amateur "Paint" skills...

 

So when the switch is off or the key is off the yellow wire is like factory but then when the switch is on the wire is cut.

 

That's my plan,

Since I am dealing with very low voltage through the switch and relay I was going to just tap into the power from either of my power outlets up front.

Once I get the wiring correct I would like to use one to do the ABS wire mod also, but tied into a lighted switch,

I have an extra LED sitting in a left side blank slot that would be great for this mod because the LED is so stinking bright you would never forget
about it, lol...