(805) TW Members Thread

State parks are not closed, but local trails in national forrests are closed. Miller jeep trail is closed but hungry valley is open. That's because MJT is patrolled by nat. Forrest rangers. Not state park rangers.

 

sooooo who is going to glamis on the 24th..?

 

YAY



beee teee dubs, check your cellllyyy phone

 

Good thing west camino isnt in a state park

 

It's Lobster Fest down at the harbor on Saturday morning, so after some beers and tasting some of the fresh catch I could be in to help out a bit. Make sure to soak all the bolts you will need to remove in PB Blaster the night before you want to get started.

Funny thing is, majority of that land back there is national forest and luckily for us SB is one of the very few places that has their national forests still open. I was up at Jameson lake last weekend and the gates were wide open all the way back!

 

Hell yeah! Lobster fest!!! I'm going too!

 

Awesome! you coming up to sb, or staying in Ventura?

 

The wife, kid and I are coming to SB. We gotta go pick up our wine shipment at the Kalyra tasting room then we're hitting the harbor then possibly get some zoo time in. What time you gonna be there?

 

Anyone have a machine shop they trust in the 805 i can take a motor to be bored out?

 

You can rent one at almost any auto parts store. And the slug actually goes in pretty easy with a small vise or u can just use the bj tool that you rent as well

 

Oriellys on hollister ...getting the bj out of Jordan's spindle was a nightmare with the bj tool and no impact

 

so the gate to west was closed.... but we ended up just opening it and closing it behind us. needless to say the dirt was perfect with the little bit of rain, feels nice to jump this thing and she loved it
we should do another night run soon before it gets too dusty

 

fun times! been driving around all town looking for tools. shit in sb is hard to find. no one has a 5/8 allen. taking my front kit apart today to tightening everything.

 

I think I have a 5/8 hex key at home. I'll let you know after work

 

is it the L shaped one or the other style?

 

It connects to either a 3/8'' or 1/2'' (can't remember) socket wrench.

 

i need the L shaped one cause its a tricky bolt im trying to get to in my spindle.

 

A u joint won't work?

 

Separating the Uca from the bj is the hard part. If you not using the stock control arms again, I BFH will get it done. And then for the ball joint, just take the boot off, hammer it out. And then get the ball joint press from orielys and use and impact and press the slug in.