Nathan's 02 Tacoma Build

i couldnt open them man if u will send me some more and i'll see this time if i can open them. I really want to see em though!!!!!! i bet with what u had they look great man. like i said they can be used for about anything. r u going to put a rack type basket on the top of the canopy? it would look bad ass man!!!

 

FFFFIIIINNNLLLYYYY!!!!!

Here's a teaser of the projectors.

 

Looks awesome Nathan

What did you do to get that stripped lock bolt fixed?

 

My dad down at the garage were he works at got one of them locking nuts that has the teflon at the end of the bolt to lock them and we just turned it around and an made threads through the teflon part and a little of the bolt itself was hold the projector in. It holds it i think tighter than the one they sent me thats on the passenger side. the bolt was so thick though he had to take it back to work and cut it down to make it a little thinner to where the bulb would be held on too. when he cut it thinner it didnt mess anything up on the bolt like the threads and all. I'll have to say I was excited to get them on and see how they looked!!!! just have to adjust them now where they r level. keep on the look out though cause im hopin this evening to post a lot of pics that i had taken yesterday.

 

So finally got around to get some pics of the projectors and the truck:








TW sticker im reppin:

 

Got around in taken some pics of the truck:









Best pic I could get of Hibritian Mountain through the tree's:
















Projector's and Hella 500 Fog's

 

Looks real clean, aaaaalmost too clean

Haha, just kidding -- lookin' good man

 

Lookin real good man!

 

Thanks Mark appreciate it man. i try to keep er waxed about once a month!!!! Hahahaha!!! u should see the looks i get when i go to work or across town. people probobly think thats the cleanest Tacoma round the area. Hahaha!!! i like how u can get in to ur camper on the side. i was wantin to get that on mine but didnt. comes in real handy i bet. like the look too with the camper on their and the cb antenna at the back man. AWESOME!!!!

 

Thanks Cody appreciate it. hows the fabrication goin with the racks on the camper u got?

 

Once a month?! I'd say probably the cleanest Tacoma in NC! Yeah my Dad likes that about my canopy too, it definitely comes in handy. I keep the CB antenna off in town, can't fit into parking garages with it on plus not a whole lot of people have CBs driving around in the city

 

im tryin to figure out how to hold my fishin rods in the back of mine but hang them from the top so nothing i put in the back will mess em up. im hopin soon to get my winch put on but will see. theirs a lot of other projects we have goin on but hopin soon. that will add a lot to the stance of the truck too. just wonderin how cold has it gotten out their. why i ask is i like the cold way more than the heat but thats just me? hahaha!!!! how much is ur tint u have? an do u have a tint strip across the front?

 

I hear PVC piping works well for guys. Do a search here on the forum, I can GUARANTEE that someone (or a few people) have done that mod. A winch will probably lower your front by 0.25".... maybe. These eibach coils are pretty stiff.

Eh it's like mid 50s but cloudy/rainy. Apparently we're supposed to have a cold winter so I'm excited for that. I want to try out these snow rated Duratracs

 

im bought to pick up an arb for a steal. I know youv got the coils and billies, but what do you have them set at? im scared that bumper is gonna weigh to much and make my front end drop. iv just got a 3 inch spacer up front. aals in the cack.

 

ive got them set at the bottom setting which is stick i think. to me it really didnt sit the front down that much IMO. it took me and my buddy to hold it up and then someone under the truck to bolt it on. I got the arb for a STEAL too man only paid 250 bucks. couldnt pass it up. if u dont mind me askin how much r u gettin urs for?

 

it is not definite yet... but I will basically by getting it for 70$$

 

if u do get it man thats a good deal. the only thing mine didnt come with was the bumpstop and the recovery points which i had made. wonderin if i could get parts form arb in gettin the bumpstops, some new signal lenses, and a new arb sticker since the one on it is a little fadded. wantin to sand blast it and repaint it to make it look better but i'll have to take the bumper off and dont know about that though!!!! hahaha!!!!!!!!!!

 

Got this bed extender from guy of craigslist in the area. I have to give a shout out to 02goldie for findin this and lettin me know about it.

 

I spy winch
My m8000 is coming Tuesday and AmSteel synthetic line arrived today