Method Wheels Pic Request

Gotcha - look forward to checking the new setup out.

 

I see you're running the ICON shocks. How much lift are you getting in the front and what are you running in the rear? got more pics?

 

I have 4" Camburg spindles and approximately 1.5" of preload on my coilovers, so somewhere around 5.5-6" in the front. 3.5" in the rear with Icon 2.0's for now.

 

Any rubbing issue? I have a 2012 SR5 Prerunner (DCSB). Would it fit?

 

No rubbing issues at all with stock prerunner suspension.

 

question guys. i have 16x8 4.5 BS 0 offset sitting at my local 4wheelparts, they are telling me that the wheels are most likely going to rub on my calipers (2013 TRD OR). i emailed method and they said they should fit, but 4wheel is being pretty stubborn. if they mount the tires and then the wheels rub supposedly i can't send them back, only shave my calipers which i don't want to do.

love the way these wheels look on everyone's rides. don't want to have to bump up tires sizes and everything right now unless i have to.

advice?

 

Tough call. I just got a set 17x9 -12 (another brand) and tested fit only the rims. It was sitting out more than I would like. I am working on sending them back at 33 lbs each

 

sick tire/wheel combo

 

Is anybody running Method's 17x7.5? I'd like to stick with my 265/70/17 and this rim would be the perfect width if they will fit.

 

i really do love the way this truck looks
I wonder if those wheels over stock would solve my Uca arm rubbing while at lock with 315/70/17

 

Method double standards 17's painted the bolts black.

 

I know I'm reviving an old thread here, but what size tires are these and were spacers required? And would you happen to have anymore pictures?

 

No spacers. these were 285/75/r16

theres some more pictures on the build thread if it's still up. ive sold that truck

 

What tires are/were you running with the 17 inch rims? And did you need spacers? I have method double standards in 17 inches and plan on doing a full 3inch mid travel setup. I'm already going to do a cmc but would like to know if I need spacers or not and if they rub in the uca. I was wanting to do 285/70/17..

 

Thank you for the response. I thought they were 17's. I just wanted to know if I would need spacers for 17's with 0 offset and 4.75 inch bs..

 

This picture is old with 265 General Grabbers, I have 275 KO2's now. No spacers needed but you will have to do a CMC for 285s.

 

Were you on stock suspension in the picture with the grabbers? Any rubbing or issues? Looking to do the same setup if I can on stock suspension.

 

no on Bilstein/toytec lift with a AAL, Since upgraded to Icon/Dakar lift. You will be fine with stock suspension and 265s.

 

Thank you!

 

okay cool, I'm in the process of doing a cmc before installing tires and lift.