Brendo Ballz808 Taco Project!

I take pictures from a distance

 

Alright now we need close ups hahaha no worries no be shy

 

I'll get around to them once the monsoons end and I can give the truck a proper wash

 

in the end how does your truck ride with the drop you have and the wheels, ive been looking at wheel for days and i cant get my eyes off your wheels (and the wife likes them which is rare). also is the rear flush with the bedside. thanks in advance.

 

His wheels are pretty sexy

 

^^ agreed!

 

my ride isn't too bad the front is a lil stiffer do to the higher spring rate in the coils and the rear is stiffer than stock with the toxic shocks and 4x4 leaf pack it isn't a bad stiff i feel i can hug turns better but it be perfect with a sway bar
as for the flushness after my suspension settled i sorta have a small rake the front is flush to the fender with no one inside and the rear has about a 3/4" to a inch gap with no load i did drop in tire size from stock and in the process i gained 1/2" more wheel gap when i have the stocks on I'm pretty much to the fender in the rear it actually bothers me so ill be lowering the rear prolly another inch it is my daily can't be too low and the front i may drop 1/4" or 1/2" i rub when its lock to lock i did remove the bedside brace roll the rear and slightly pulled it a lil give the ass a phat appearance in rear shots

glad you like the wheels bro!! i believe the 20x10 +35 stretch a bit on 245/35/20 would be perfect but i just chose to go smaller tire

mahalo mahalo!

 

Yessiree.........

 

those are some really nice shots

 

Thanks guys still learning and improving

 

Damn I really like the third to last and the last pic. Frick I tink its magazine time baddah! Lol. Always makes me wanna go lower !!! Lol

 

Mahalo brah naw it has dings and that nig dent on the right rear door and stratches
Can't see it cause its white hutbthe dent is there I really wanna fix it then ill be happy that's what happens hen you buy a commercial used vehicle all kine stuff

 

Newest mod got rid of the turn down pipe and had the exhaust routed to the rear being dumped before the axle and dropped was not a good combo for me way too mucj drone and didn't sound how I liked it too the piping isn't mendral but o well I'm much happier with the interior noise and the sound outside is raunchy louder than dual 44s and deep can't wait for lce headers for a bit.more pep and better sound throughout the rpm band
It's 2 1/2" piping to a 3 1/2" x 12" angle cut tip





Will be painting the piping black and the shackles and leafs it is still the aero turbine 2525 non resonated with both cats and stock headers future will be lce headers but idk if I wanna do no cats

 

Idk how to show it on here but click the link to watch a short clip of the exhaust

http://s1293.photobucket.com/user/b...096139e68e9e67116bb59419_zpscc35d34c.mp4.html

 

Eh u stole my led light from my truck ah!!! Oh wait it's still there

 

clean! in time i was lookin at wheels about da same specs as yours... nice to see a buncha shots of fitment. u had to roll fenders??

 

I had to roll and stretch my rears, I'm assuming B had to do the same.

 

Pretty much but I did a shitty job I had to do it on the side of the road cuz started cutting I gotta redo em but she no cut anymore

Ooo my you like stretching rears!!!!! Ho nah!! Hahahah

 

Idk how less to show this video but check em out just a short clip of me rolling by

http://i1293.photobucket.com/albums...a4bbd933347c5856bc4f3ade0cf20_zpsa2a5ac86.mp4

 

Nice truck man, i remember all you lowered guys used to cruise at the walmart parking lot. Where u guys meet up now?