What Have You Done To Your 2nd Gen Tacoma Today?

huh...cordless...would be great because i have my stock one tucked inside the fender well (under the glass)

how much if you dont mind me asking?

 

http://s16.photobucket.com/user/The...C4-5572-000003A854436630_zps5a80324b.mp4.html

Installed the redline kit

 

WHat? cordless?

 

I was going to change all my switch bulbs over to white LEDs but the LEDs I ordered are too long and mess with the switch actuation.

 

Nice! Doing this today..

Since yours is a '13 also… did you mount it at 16.25" as the new instructions indicate for a 2013 or at 15.5" as other members have recommended???

Thanks and looking forward to having this mod done.. looks nice.

 

I put the bottom edge at 16" and it works well

 

Excellent. Thanks for the speedy reply..

Cheers!

 

Last page of my build.

 

I really like mine, it's so nice to be able to open the hood and not have to reach for the bar.

 

Were did you stick the antenna?

 

I finished and installed my Shatoshi grill on Sunday!

 

Finished it up!
Time for a very badly needed alignment now after I adjust the coilovers
The rear shocks are also 2" too short..... Limit straps? Agh.
Kings all around, Deaver leafs and finally the clusterfuck that 4wheel parts put me in IS OVER.

 

All that and no U-bolt flip?

 

Son of a bitch. I'll put myself in the corner now. Where's the dunce cap? It didn't even cross my mind during all this & it's on my list to do...

 

Cool, what kind of antenna, make, model. My reception is terrible. I have read about others on here who have done a FM booster with no change.

thanks

 

How hard was this to take off? Doesn't it mess with alignment?

 

Wasn't today, but the whole week...installed my TC 3.5" LT kit, King 2.5x8 coilovers, Wheeler's Superbumps, All Pro leaf pack, and U bolt flip kit.

Didn't waste a minute, went straight to Ocotillo Wells the next morning to test.

 

I have a U bolt flip kit on my setup. I'll send you my complete lift, and you send me yours. I guess I could live with it

 

That's what the pen mark on the blue tape is for.

 

Not today but got my switchbacks installed over the weekend