FEELER! LSK 3.5" Longtravel Kit (UCAs, LCAs, Spindles, Shocks, Steering and Straps

Hi. Im putting a feeler out for my 2wd LSK kit. It is an awesome kit. I've never had a single issue with it and I constantly get complements on it. The reason this is a FEELER is because LSK has contacted me about making a race kit for me so this set up would have to go. If there is no interest, I will keep the kit. This kit cycles 14.5" of clean travel w/ king hydro bumps. I am looking to sell the full setup. You will get everything you need to put this on your truck and drive off into the sunset. The whole kit isn't even a year old and all of the hiems, uniballs and other wearable pieces are just barely worn in. I take very good care of this kit. I make sure the kit is in good condition every week and I clean it once every week as well. All hardware/ hiem spacers, ect are included. This kit is fully bolt on and can be removed easily if desired. It has strike pads on the LCAs and is set up for hydrolic bumpstops as shown but the kit will work perfectly fine with the stock rubber bumpstops. This kit will require fiberglass fenders.

I am asking $3,000 for the whole setup.

The kit will include:

-LSKs boxed 3.5" longer lower control arms w/ upgraded Delrin bushings. These bushings are self lubricating and don't require maintenance. They include the lower 1" uniball adapter to the spindle (works on stock spindles as well)









-LSK's 3.5" longer tubular heimed upper control arms with 1" uniballs









-LSK's 3" Lift Fully Boxed Spindles made to accept the custom heimed steering





-LSK's 3.5" longer steering extensions w/ hiem conversion. This piece is threaded on where the steering ball joint would normally go.



-LSK's Bolt on LCA solid mounts. These get rid of your alignment cams and solid mount your suspension so when you thrash on it, your truck wont go out of alignment.



-FOX 8" 2.5 Race Series Coilovers. I have extra valve shims if the suspension feels too soft. Currently valved very soft but I like it.

PICS TOMORROW!

-Eibach 18" 3.0 600lbs springs bought in March of this year



-DJ Safety Limit Straps Triple Ply



PICS OF THE KIT IN ACTION

 

$500 and unlimited from greg at your call. Wish I had 3K laying around I'd definitely buy this off you.

 

Ill def think about it. Thing is greg has been getting his mouth stretched out a lot lately....

 

Payment plan? (semi-srs)

 

how much for the spindles

 

sorry jr, if he splits them theyre mine lmao

 

Sorry Anthony.

 

Sure. I'm willing to work out something

 

Will work with 4wd?

 

glwts

 

Im not sure. Ill see if I can ask LSK tomorrow. Would be pretty gnar gnar on an FJ!

 

Thanks Oskar

 

It doesn't work with camburg spindles, right? On another subject,
What tires size are you running?

 

Just remembered, buyer will need to buy longer brake lines.

Camburg and TC sells them for $100. Just send them an email. Or you could give LSK a call and they could get you the same lines. Just preference of company I guess.

 

The kit will work with stock and aftermarket non double sheared spindles. The camburg spindles WILL work on this kit.

Im running 285/75/16 Falkens. You could run up to a 315 with this kit.

 

nice!

 

Rodger. Those spindles are yours

 

All pms returned

 

aye dios mio!