Eagle Eyes Halo Projector Headlights (2006 Tacoma)

What website did you get them from?

 

Get them from ebay.

 

Dizzle, do you have any issues with water getting into the headlight after driving through puddles or driving in the rain?

 

I did the same thing to mine and I also have not had this problem again.

 

did you drill the side and bottom hole? I only drilled the side hole through the clear lens and I still am having the problem.

 

Are you saying to drill a hole in the backing, or in the front part?

 

I just bought a 2006 TRD 6spd. The LED in one headlamp is out. Is there a way to replace/repair?

 

Hey Socalax91. How is the brightness on your lights? And on the bottom of yours.. Is that for the blinker??

 

They are bright in my opinion. The bottom is always on not just with the blinker.

 

Oh Okay they look purple! Looks cool. Debating on which style I like better for Halos.

 

Can anyone who has these lights answer this question?

 

H4 is combo hi/lo bulb. These are seperate hi/lo beams. Lemme check on exactly what they are...........

 

I think my lights use...

H3 in the low beam
H1 in the high beam

 

Got mine in.





Very bright. The path for the brights is a bit narrow and it takes some getting used to from stock to these. I also now have Blinglights white Halo foglamps shown with all Halos on in the first pic. I did a review on those under the Lighting category. Bought my headlamps from K2motor.com very fast shipping easy to install, no fogging.

 

Looks awesome!!

 

DUDE SICK!!!!!!!! Love the fogs too.

 

Thanks really the Halos are really really dim. I dunno how to make them brighter. Definitely not CCFL's. But the driving lights part are insanely bright. I may, when i get my grille, move them to behind the grille and reinsert my stock fogs. also.

 

The headlights are CCFL's though right?

 

Absolutely! The Halos are so bright that my camera cant focus on them from more than 2 feet away.

 

Hey TW members... It's been a while since I've been on here. Been REALLY busy with work and all... And I am starting a DJ apprenticeship, so I’ve been busy with that too… Just wanted to update everyone on my lights.

Last night when going home, I had a bulb go out... And FYI, unless you have a REALLY short screwdriver - you'll have to take the grill out and the light assembly housing out of the front of the truck to replace the bulb. As a matter of fact - I'd recommend it since the bulb itself is held in by a metal wire clip that is screwed down into the housing with two short screws and a small piece of metal...

The good news that it will not come out when driving - but bad news when you have to change it - and quite different than standard Taco bulbs.

Anyway, heads-up on that. I think I picked up Sylvannia H7 bulbs... which ran 14.99 each. I’ll try to pull and post the number later.

Was a pain in the ass - but got it done in under an hour.