What Have You Done To Your 2nd Gen Tacoma Today?

Do you get any water in the bed?

 

what company is that? it looks like a swet bumper, and i like the double LED pod fog lights

 

just took er out to do some donuts in da snowww!

 

[QUOTE="OldManTan";7773595]Do you get any water in the bed?[/QUOTE]

I haven't really tested it since replacing the weatherstripping yesterday but I used to get a trickle in the front right hand side but I think that was because the weatherstripping had migrated forward and the water was coming down the front of the cap , hitting the exposed weatherstrip and coming inside

 

Nice - I'm going to follow suit on that. Sick of the little puddle at the passenger-side front corner of the box that I keep getting...

Also need to pull the passenger window and silicone around the frame to stop a leak that's started there. Had the driver side fixed on warranty a couple of years ago. Can't recall if it's a 3 or a 5 year warranty - will have to call the shop tomorrow and inquire.

 

This is a Road Armor, I love the look and I got a pretty sweet deal since the dealer damaged the factory bumper.

 

dammit, you had to go and make me jelly... that a hell of price tag considering i would need a 2012 front end swap while im at it

 

New tires.

 

The front bedrail sits about 1/8" lower than the edge of the bed , I put a strip of the tape on the top of the bed rail only ( didn't span across to the bed side ) and trimmed off the excess material inboard .

This brought the top of the first layer of tape to just above the height of the top of the bed , then the second layer I spanned across and onto the bed , this made it so that the tape build up had a slight positive slope towards the front outside of the bed

 

I would go with a dedicated snow tire unless your in St. John's and only St. John's. I have toto open country at2's and a studded snow tire is definitely better in snow. I had studded general grabber at2's last winter and they were great but broke belts in all 4 tires. Now being replaced under warranty and think I'm going with Goodyear territories now, also studded.

 

Oil serviced, and derped my emblems. Operation black out almost completed. Just need to do the head and tail lights. Maybe a set of 265's and a bull bar. That is it though, no more, truck complete.......for now.

 

Good lookin truck

 

arb bar

 

That's pretty much how I did the weather striping on my TorzaTop. I didn't trim the excess inboard, not necessary for the tonneau, but a nice touch

I got new tires yesterday in 265/70/17 Rugged Terrain, really happy with the choice so far. Did an oil change w Moble 1 and factory filter today

 

Do those go over the factory bumper?

 

Left it sitting in the garage all day while I took a long deserved nap.

 

Tacoma Centipede: The Salt Bath

 

Got it bloody and used the winch

 

^That's a giant shackle.

 

Got a giant winch hook to go with it. Hook is just attached to a 30' strap though. Didn't want to add the extra 30ish pound hook to the front end