What have you done to your Tacoma today? 1st Gen Edition

Awesome! Looks like I am going to have to give that a try now. I think I'll try that after my trip as this is my last day off till I leave.

Thanks for the info! Much appreciated.

 

You're welcome.

Those are Quick Fist model:10010

They work perfect for a shovel, maul and Hi Lift (the Hi Lift is a little tight in there but that's what you want)

 

Great! Looking out thank you!

 

Hippie getting high in Boulder. Typical.

 

Getting 235 85 R16 General Grabber AT2's installed. Pics to follow.

 

Uh....don't you mean departure angle? Breakover would be belly clearance.

 

Finally installed a BPV bracket on my rig. No more nose dive on stops!

 

My rack is taller and more upright now too. It is actually easier to have the tools on the side of the rack now than it was when it was lower.


I kinda like the rack on the spare, except for the fact that it sticks out quite a bit behind the tire. If you could somehow tuck it in tight against the tire it wouldn't be too bad. And as far as it being a pain to get to the spare, if you've got a flat and need the spare you'll probably have the hilift off already anyway. It's not like you need a Nascar style pitstop completed in 4 seconds.

I've got tools on my spare tire too so if it works for you, don't worry about what others are saying.

 

Clearanced and test fit some 255/85s



And tested them out


A few more pics in my build.

 

Time to re retro my headlights

 

3' for me. I like the way it looks better than the 4', but I know the 4' will get better reception/range.

 

4' here as well...

 

3' clears your topper?

 

Can anyone give any insight about my alignment numbers? I'm just a little concerned about my right side caster...

Camber: L: -0.61 R: 0.07
Caster: L: 0.15 R: 1.35
Toe: L: 0.10 R: 0.10

Edit: This is the alignment after i installed my Icons. They're set to 2"

 

I have a 3' and have about 2 miles of range.

 

Differential Drop just arrived, waiting on my new Autozone CV axle

 

Yep by over a foot I'd say.

 

Re-did the door panels from the soundproofing job.

Cut out the holes for the panel fasteners:


New fasteners in:


http://www.tacomaworld.com/forum/1st-gen-builds/259729-tomtoms-03-trd-xtra-cab-30.html#post7858482

 

4 footer here