1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

My Little Secret!

Discussion in 'Performance and Tuning' started by TACOROCK, Apr 7, 2008.

  1. Apr 7, 2008 at 5:16 PM
    #1
    TACOROCK

    TACOROCK [OP] Well-Known Member

    Joined:
    May 7, 2007
    Member:
    #1528
    Messages:
    134
    FAYETTEVILLE NC
    Vehicle:
    06 TACOMA LIFTED
    URD SUPERCHARGER 80MM PULLEY, DOUG THORLEY LONG TUBE HEADERS, MODIFIED Y-PIPE, TRUE DUAL EXHAUST MAGNAFLOW 2 IN 2 OUT, PRO COMP 6" LIFT, WIDEBAND 02/FUEL SENSOR, AVIC D3, 2 PIONEER SUBS ON A MEMPHIS 1200 WATT AMP RMS, DIY MOD FOR ALL INTERIOR SPEAKERS FULL TINT, LEER CAMPER, EURO LIGHTS, BILLET GRILL, BULL BAR WESTIN RUNNING BARS, AIR HORN, AND A RADIATOR POPPER
    THIS IS A SECRET IN THE RACE WORLD... YOU HAVE PROBABLY PASSED THIS UP A 100 TIMES OR SO IN YOUR LOCAL AUTO STORE. ITS AWESOME THIS IS THE ONLY PRODUCT THAT I HAVE FOUND THAT HAS Trinitrotoluene "TNT" NO IT DOSN'T HAVE TRI OR THE NITRO INCLUDED!! I AM A DEMOLITIONS GUY IN THE MILITARY SO I KNOW A LIL BIT ABOUT IT... TNT IS A CONSTITUENT OF EXPLOSIVES LIKE AMATOL, PENTOLITE, TETRYTOL, TORPEX, TRITONAL, PICRATOL, COMP B, ALSO CALLED TRITOLO, TRITON, TRILITE, TRINOL ETC... WELL ENOUGH OF THE BIG WORDS!! IT IS CALLED B-12 CHEMTOOL. IT IS MADE BY BERRYMAN AND A LIL HISTORY ON THE COMPANY THEY PRODUCED TOLUENE BI PRODUCTS SINCE THE LATE 1800'S BUT DECIDED THAT THERE PRODUCT WOULD AND COULD BE USED IN COMBUSTION ENGINES!! AND THEY DID!!!! SO GO UP TO YOUR LOCAL AUTO STORE AND PASS UP THE SEA FOAM AND GRAB THE RED AND BLUE CAN WITH WHITE WRITING ON IT.. AND STEAL SOME HIDDEN HORSE POWER FROM YOUR TACO!!! IT IS COMPLETELY SAFE!! AND CHEAP!! NOT ONLY WILL YOU GET SOME HP BUT YOU WILL SAVE SOME GAS MILEAGE!! IT IS O2 SAFE!!!! SO DONT BE WORRIED!! HOWEVER IT IS EXTREMELY!!!!!!! FLAMABLE..... SERIOUSLY !!! JUST PUT THE CRACK PIPE DOWN WHEN YOU ARE ADDING IT TO YOUR TANK!!;)
     
  2. Apr 7, 2008 at 5:19 PM
    #2
    tarheelfan_08

    tarheelfan_08 Carolina Alliance

    Joined:
    Jan 4, 2008
    Member:
    #4098
    Messages:
    2,944
    Gender:
    Male
    First Name:
    Justin
    North Carolina
    Vehicle:
    2010 White 4x4 Double Cab Tacoma Short Bed
    Chrome Grill, Chrome accessories(door handles and mirror covers), LEER Super White Cover, Mirrors with Turn Signals, Window Vent Visors, Step Rails, WeatherTech Digital Floor Mats, Mini Maglight Holder, Chrome Bull Bar

    Sounds like a good product!. I will have to check some out. But I may have missed it during my reading, but what is the name of it again?
     
  3. Apr 7, 2008 at 5:21 PM
    #3
    TACOROCK

    TACOROCK [OP] Well-Known Member

    Joined:
    May 7, 2007
    Member:
    #1528
    Messages:
    134
    FAYETTEVILLE NC
    Vehicle:
    06 TACOMA LIFTED
    URD SUPERCHARGER 80MM PULLEY, DOUG THORLEY LONG TUBE HEADERS, MODIFIED Y-PIPE, TRUE DUAL EXHAUST MAGNAFLOW 2 IN 2 OUT, PRO COMP 6" LIFT, WIDEBAND 02/FUEL SENSOR, AVIC D3, 2 PIONEER SUBS ON A MEMPHIS 1200 WATT AMP RMS, DIY MOD FOR ALL INTERIOR SPEAKERS FULL TINT, LEER CAMPER, EURO LIGHTS, BILLET GRILL, BULL BAR WESTIN RUNNING BARS, AIR HORN, AND A RADIATOR POPPER
    b-12 Chemtool Made By Berryman
     
  4. Apr 7, 2008 at 7:38 PM
    #4
    tacomaman06

    tacomaman06 Carolina Alliance: Enforcer

    Joined:
    May 1, 2007
    Member:
    #1475
    Messages:
    26,212
    Gender:
    Male
    First Name:
    Will
    York,South Carolina
    Vehicle:
    '16 Tundra TRD Pro
    getting there....
    it cleans carbs/chokes pretty good.......and if you pour it into a Styrofoam cup................it will eat the hell out of the styrofoam real quick........so it will probably be good as a fuel injector cleaner too.
     
  5. Apr 8, 2008 at 3:20 AM
    #5
    RoadKill

    RoadKill Northern Alliance: padawan

    Joined:
    Apr 1, 2008
    Member:
    #5679
    Messages:
    126
    North of the border
    Vehicle:
    First gen 4x4
    285x70x17 offset rims+ 1.5 spacers, rear Timbrens + 3 inch lift add a leaf, Sway-a-way coilovers + camburg control arms, Fender flares (2.5 inch), clear lights, headers, sliders, roll bar
    ordinary gas does do this also, tried to drink it also hey?
     
  6. Apr 8, 2008 at 3:38 AM
    #6
    missileman125fw

    missileman125fw Well-Known Member

    Joined:
    Dec 19, 2007
    Member:
    #3912
    Messages:
    2,714
    Hey, that's kinda cool. I was stationed at Eglin AFB when I first joined the Air Force. I was assigned to the High Explosive Research and Development Facility. We made experimental and qualified explosives in melt cast and mixed form. I also helped with the BLU-109 and AIM-120 warhead. Sorry, gee wiz info.
     
  7. Apr 8, 2008 at 11:46 AM
    #7
    iwc3714

    iwc3714 Well-Known Member

    Joined:
    Mar 11, 2008
    Member:
    #5210
    Messages:
    51
    Vehicle:
    PreRunner SR5
    Bull bar, oem side steps and 18" Enkei
    Geez, can you turn off your caps.
    This post seems like a paid ad.
     
  8. Apr 8, 2008 at 12:08 PM
    #8
    wiscdave

    wiscdave Lets Do It!

    Joined:
    Mar 20, 2008
    Member:
    #5392
    Messages:
    2,530
    Gender:
    Male
    Northern Wisconsin
    Vehicle:
    Tundra Rock Warrior
    Past ride - 3" OME 885s&Shocks/ TSB 1.5AAL/ AX184 Rims 285 Firestone destination ATs/ 2 Shallow mount P310s in Supercrew Box - Punch 601s, Beefed up Hunter Brush guard, Tint, Fog light mod, AFE Drop in, AC and Fog light mods, scangauge
    do you have any documented results? How do you know this works and doesn't cause problems? I'm not just going to dump some of this shizit into my new truck that's for sure. :)
     
  9. Apr 8, 2008 at 1:06 PM
    #9
    RoadKill

    RoadKill Northern Alliance: padawan

    Joined:
    Apr 1, 2008
    Member:
    #5679
    Messages:
    126
    North of the border
    Vehicle:
    First gen 4x4
    285x70x17 offset rims+ 1.5 spacers, rear Timbrens + 3 inch lift add a leaf, Sway-a-way coilovers + camburg control arms, Fender flares (2.5 inch), clear lights, headers, sliders, roll bar
    It crossed my mind also...

    I might try it just before toyota buys my frame back... heck i'd piss on top of the shizit just to see the front end wheely on my I4 :p
     
  10. Apr 8, 2008 at 1:17 PM
    #10
    TSUNAMI*22

    TSUNAMI*22 Obama can suck-it

    Joined:
    Oct 22, 2007
    Member:
    #3193
    Messages:
    209
    Gender:
    Male
    Stockton, CA
    Vehicle:
    '07 Standard Cab / White / 2.7 I4
    ScanGuage 2 equipped. Toyota DIY aftermarket Cruise Control mod
    I have a secret too....go to the paint store, by the ingredients separately and make your own chemtool for less than 1/2 the cost of a can of berrymans B-12.

    Been doing it for years.:D
     
  11. Apr 8, 2008 at 1:32 PM
    #11
    kilo

    kilo Solo Member

    Joined:
    Apr 10, 2007
    Member:
    #1283
    Messages:
    639
    Gender:
    Male
    San Antonio, Texas
    Vehicle:
    2007 Dbl cab long bed TRD Sport
    custom sliders, 3" Old Man Emu lift, onboard air, custom surf-rod mount, custom bed rack, ARB bumper, Budbuilt fuel tank skid-plate
    Not going to do anything other than displace water if you have any in your fuel and may clean your injectors. Thats it.
     
  12. Apr 8, 2008 at 1:36 PM
    #12
    TSUNAMI*22

    TSUNAMI*22 Obama can suck-it

    Joined:
    Oct 22, 2007
    Member:
    #3193
    Messages:
    209
    Gender:
    Male
    Stockton, CA
    Vehicle:
    '07 Standard Cab / White / 2.7 I4
    ScanGuage 2 equipped. Toyota DIY aftermarket Cruise Control mod
    Take some of the stuff and pour it in a pan. Take an old greasy gummed-up bicycle chain and submerge it for a few hours.

    Afterwards, your bike chain should sparkle.

    Basically it removes varnish, gum, and all the nasty stuff that accumulates on top of your pistons, rings, valve seats....etc.

    Every 10,000 miles I pour a 16 oz. volume of it into my oil filler hole before an oil change.

    YOU HAVE TO POUR IT IN SLOWLY, AND INTO A ENGINE THAT IS WARMED UP AND RUNNING AT THE TIME.

    Let your engine run for about 20 minutes at high idle (1,500 rpm's or so). Do not drive with it in your oil pan. Afterwards, let it cool down and drain completely.

    I noticed that by doing this my oil didn't get dark as fast as it used to.

    In some cases (older engines) I wouldn't do this. Severe gunk can dislodge, clog your filter, and cause obvious problems.

    I run it in the tank so the injectors stay clean.

    Never had a problem doing this, yet.
     
  13. Apr 8, 2008 at 1:55 PM
    #13
    wiscdave

    wiscdave Lets Do It!

    Joined:
    Mar 20, 2008
    Member:
    #5392
    Messages:
    2,530
    Gender:
    Male
    Northern Wisconsin
    Vehicle:
    Tundra Rock Warrior
    Past ride - 3" OME 885s&Shocks/ TSB 1.5AAL/ AX184 Rims 285 Firestone destination ATs/ 2 Shallow mount P310s in Supercrew Box - Punch 601s, Beefed up Hunter Brush guard, Tint, Fog light mod, AFE Drop in, AC and Fog light mods, scangauge
    Is this like seafoam? What if you don't get it all out...is that maybe why your oil is not as dark?
     
  14. Apr 8, 2008 at 2:10 PM
    #14
    tacomaman06

    tacomaman06 Carolina Alliance: Enforcer

    Joined:
    May 1, 2007
    Member:
    #1475
    Messages:
    26,212
    Gender:
    Male
    First Name:
    Will
    York,South Carolina
    Vehicle:
    '16 Tundra TRD Pro
    getting there....
    yeah.......i wanted to see if it tasted like my moonshine:rolleyes:.
     
  15. Apr 8, 2008 at 2:11 PM
    #15
    TSUNAMI*22

    TSUNAMI*22 Obama can suck-it

    Joined:
    Oct 22, 2007
    Member:
    #3193
    Messages:
    209
    Gender:
    Male
    Stockton, CA
    Vehicle:
    '07 Standard Cab / White / 2.7 I4
    ScanGuage 2 equipped. Toyota DIY aftermarket Cruise Control mod
    I don't know what "seafoam" is.

    I think my oil stays clearer longer because the inside of the engine is cleaner before the detergent in the "new" oil does it's job.

    Did that make sense? :eek:
     
  16. Apr 10, 2008 at 3:04 PM
    #16
    TACOROCK

    TACOROCK [OP] Well-Known Member

    Joined:
    May 7, 2007
    Member:
    #1528
    Messages:
    134
    FAYETTEVILLE NC
    Vehicle:
    06 TACOMA LIFTED
    URD SUPERCHARGER 80MM PULLEY, DOUG THORLEY LONG TUBE HEADERS, MODIFIED Y-PIPE, TRUE DUAL EXHAUST MAGNAFLOW 2 IN 2 OUT, PRO COMP 6" LIFT, WIDEBAND 02/FUEL SENSOR, AVIC D3, 2 PIONEER SUBS ON A MEMPHIS 1200 WATT AMP RMS, DIY MOD FOR ALL INTERIOR SPEAKERS FULL TINT, LEER CAMPER, EURO LIGHTS, BILLET GRILL, BULL BAR WESTIN RUNNING BARS, AIR HORN, AND A RADIATOR POPPER
    Sorry you guys dont like my caps! lol... i have a scangauge... and did a test run of 20 miles... first what i did was ran a stock gas 93 octane through... keep in mind my truck is supercharged..... i burnt 1.6 gallons of fuel according to the scangauge. i then poured a can of b12 into my engine while fueling up for good mixture. i filled up my tank to full and took it offroad for a minute or two! {my excuse to offroad!} for good mixture purposes!;) i went back home and ensure the environment was as close as possible to the original settings. i reset the scangauge and dit the same 20 mile strip. rpm's were at 2,100. my second read out was 1.2 gallons used. take it for what you will but thats what my results came out to.
     
  17. Apr 10, 2008 at 3:12 PM
    #17
    The_Hodge

    The_Hodge Volunteer Moderator

    Joined:
    Apr 27, 2007
    Member:
    #1432
    Messages:
    31,629
    Gender:
    Male
    SC
    Vehicle:
    15 Lariat Sport 5.0L
    Seeing the third gen section forced me to get a Ford...
    so then u blew an extra .4 gallons of gas after pouring in the b-12??
     
  18. Apr 10, 2008 at 3:31 PM
    #18
    RoadKill

    RoadKill Northern Alliance: padawan

    Joined:
    Apr 1, 2008
    Member:
    #5679
    Messages:
    126
    North of the border
    Vehicle:
    First gen 4x4
    285x70x17 offset rims+ 1.5 spacers, rear Timbrens + 3 inch lift add a leaf, Sway-a-way coilovers + camburg control arms, Fender flares (2.5 inch), clear lights, headers, sliders, roll bar
    Its what I understood also :confused: so no fuel economy but more horsies?
     
  19. Apr 10, 2008 at 4:27 PM
    #19
    TACOROCK

    TACOROCK [OP] Well-Known Member

    Joined:
    May 7, 2007
    Member:
    #1528
    Messages:
    134
    FAYETTEVILLE NC
    Vehicle:
    06 TACOMA LIFTED
    URD SUPERCHARGER 80MM PULLEY, DOUG THORLEY LONG TUBE HEADERS, MODIFIED Y-PIPE, TRUE DUAL EXHAUST MAGNAFLOW 2 IN 2 OUT, PRO COMP 6" LIFT, WIDEBAND 02/FUEL SENSOR, AVIC D3, 2 PIONEER SUBS ON A MEMPHIS 1200 WATT AMP RMS, DIY MOD FOR ALL INTERIOR SPEAKERS FULL TINT, LEER CAMPER, EURO LIGHTS, BILLET GRILL, BULL BAR WESTIN RUNNING BARS, AIR HORN, AND A RADIATOR POPPER
    wrong # in wrong place
     
  20. Apr 10, 2008 at 4:30 PM
    #20
    The_Hodge

    The_Hodge Volunteer Moderator

    Joined:
    Apr 27, 2007
    Member:
    #1432
    Messages:
    31,629
    Gender:
    Male
    SC
    Vehicle:
    15 Lariat Sport 5.0L
    Seeing the third gen section forced me to get a Ford...
    ok...that makes more sense now...lol
     

Products Discussed in

To Top