Anyone running 295/65/18 Duratac's with 3" lift?

I'm just curious, because it sounds like it would just fit with 3" coilover lift I have iShock MidTravel kit. If by chance anyone has a DCLB with pics that would be awesome

 

That's going to require a lot of cutting. Mud flap removal, cab mount chop, and cutting of a lot of plastic.

 

if only they had a 285/65/18...

 

I'm running 285/65/18 nitto trail grapplers with 3" fox coilovers and scrub a little on sharp turns if this helps

 

Yep. About as close as you're gonna get is some siped Trail Grappler's, which would not be a bad alternative.

 

My brother runs 295 75 16 on 4 inch lift had to trim a lil nothin major

 

They have 275/70/18 duratracs but my rims are 9inch wide and my girl pushed the sidewall off the bead on the stock tires

 

That could happen just as easily with a 295, I'm running 265 Duratrac's on 9" wheels right now, and people run even narrower than that without problems.

 

A 275/70 would fit with some trimming without cab mount chop I would imagine

 

Yes. It's the same diameter as the 295/65, but almost an inch narrower, and that inch will make a big difference.

 

The measured rim width matches better on the 275/65/18, but then it's just 32s. But then again if I did that I would need no trimming and could keep the spare under the bed and it would be better for towing. If the 275/70 fits tho I'd rather have the bigger tire