Northern Virginia Roll Call

Like i told joneill, i work in fredericksburg so if i can find time and the dealer i can try to take a look at it, only thing is that its usually dark when i get off work and i feel like it could be better looked at during the day so that limits me to weekends and im pretty sure ill be out of towm this weekend so maybe next weekend i can make time. Keep us updated though so we know if/when someone looks at it

 

Happy New Year guys. I know I met some of you at the Steven's Show and Tell, good time for sure.

Throwing this out there. We just installed a TRD catback on my son's 2010 Access Cab with 43K miles. The original exhaust is available for pickup if anyone wants it. Let me know of any interest and we can even meet somewhere close. I'm in Harpers Ferry, work in Frederick, he's down in Rockville. Have a Happy and be safe!

 

I know 'spithead' is looking for one.

 

Happy new year yall!

 

I am just a few miles from there and although I am sure they are closed today I may stop by to take a look. I wii most def. stop and check it out tomorrow though. Will let you know what I find. I don't know a whole lot about T4R's but will give it a shot.

 

Happy new year everyone

 

Indeed,

 

PM Sent!

 

Anyone here fished in the Potomac up towards Point of Rocks or Harpers Ferry? I really want to go river fishing but havent been around here besides a few of the lakes in the state parks. I'm just not really sure what kind of permits and stuff I would need seeing as how the river is the dividing line of MD/VA and all. haha

 

Replied

 

I texted around trying to find someone with your #. For some reason, couldn't find yours in my contacts. Might have lost it in between swapping phones.

Just trying to lookout for you.

 

Just check it like it's a taco haha. Same drivetrain and same frame rust issues. I'm mainly concerned about excess frame rust. Obviously they rust, but if it looks like the frame is flaking or severely orange, or bolt heads are rusting away, I would like to know that.

They told me it's at the mechanic shop waiting on some new parts so it might not be out and visible right now.

 

You can fish most of the river (including that part) with either a VA or MD license. There can be some really good smallmouth fishing there. It really depends on the water level. If the water is high, it can get moving through there quickly making it pretty hard to fish. The best fishing is when the water level is low, but that can make it difficult to get around without damaging your boat/kayak.

 

Yeah didn't see it but am driving by there this morning and will see if it is around, if not I'll keep trying until I see it.

 

I appreciate it! They are going to send me more pictures when it is done, so I will let you know when they come in.

 

Alright cool. Thanks! I don't have a boat so I'll be either on the bank or wading depending on how high and strong the water is that day. I probably won't be going for a month or so when it starts to warm up a little I just wanted to make sure what sort of permits I would need. I need to do some research and go buy a new rod now lol

 

Looking to sell a set of (4) rims. Raceline Rockcrusher 887's.







Specs
Finish: Matte Black
Size: 16x8
Bolt Pattern: 6x5.5 duh
Offset: -20mm
Back space: 3.625
Center Bore: 4.25

I'm going back to my stock rims and i'm looking to sell these. I've only had them for a few months so they're basically brand new. Not trying to sell them for a whole lot, willing to negotiate pricing.

Due to the offset of the wheels there was some rubbing when i first put them on. Trimmed the fender and inner fender wall with a utility knife... fixed that right up. It barely rubbed the cab mount as well. This usually happened at full lock when reversing out of my driveway, just barely enough to be a bit of an annoyance but not really a big deal. It never rubbed under normal driving conditions and turning, just at full lock when reversing. I had Danny trim up the cab mount a bit and now theres no rub at all.

I'll include the lug nuts as well, as these rims cannot be installed with the Toyota factory lug nuts.

PM me if you're interested. Figure I'd try the local page before tryin to ship them anywhere.

Link to the manufacturers page: http://www.racelinewheels.com/p-208-887-rockcrusher.aspx

Link to page where i purchased them: http://lsdmotorsports.com/merchant2...eline-Rock-Crusher&gColor=Black&gSize=&gBolt=

 

Sorry its been a while for updates. Engine is in front mount is fabricated alot of stuff has changed. But another week or so it will be completely done. Then tuning time

 

Looking good Danny!

 

Yeah looking good man!!