Anybody running these?

http://www.carid.com/2005-toyota-ta...fl-halo-led-projector-headlights-3696325.html

Is Anubody Running These? Pros And Cons, Looking For A Good Aftermarket Light.

 

Me. I love them. Only real thing is to make sure to aim the lights after you install them

 

Did You Have Daytime Running Lights? If Not, How Did Yiu Het The Leds To Work? Im Tjinking I Can Wire Them Into My Parking Lights And Itll Work.

How Do You Aim Them?

 

No day time Lights. I hooked them to my parking light wire . To aim them there are 2 screws for each light bulb. One of the screws is Up/down at the other is Left/Right. Just a 5/16 socket it think did the trick



EDIT: fixed error

 

So They Only Come On When Uou Apply The Parking Brake?

 

sorry parking light. They come one with my parking lights.

 

Ok, So Like I Asked, I Could Do That? As Long As Parking Lights Are On, Halos And Leds Will Be On?

 

Yes that is correct. As long as the parking lights are on the halos and leds come on. You have to be careful though because in some places running with just parking lights is illegal.

 

If You Cut The Low/High Beams On, Do They Stay On?

 

yes

 

Hey Man, I Appreciate It!! One More Question, You Just Cut The Harness For The Parking Lights And Wired The Two Hots, And The Two Negatives To The Parking Light Hot And Negative?

 

And Do You Have A Pic With Lows And Highs On Also?

 

No. They are completely plug and play. You just plug your headlight harness into the respective one on the new headlights. You also use your current parking light bulb in the new headlights. Then for the LEDS and Halos you have to connect all the positive wires together and same with the negative. Once the respective wires are bundled you just tap into the parking light wires.

I used these for bundling and taping into the wires

 

With That You Just Splice Into The Paking Light Wire?

 

Yes the positive and the negative wires.

 

I Appreciate It Man.

 

No problem man glad I could help. the instructions that came with them are pretty clear on what to do also.

 

Thays Good, Im New To All Of This. haha

 

Look up how to remove the headlight housings thats what takes the longest.

 

I Did That Today, I Was Going To Black Them Out, But Broke The Clip That Keeps It Lined Up, So Now My Bulb Is All EFfd Up, Thats Why Im So Anxious About It. Its Still In Place, Just Shines off