NJ B.S. Thread

You can have the board and bindings for $50 if you want man. I think a nut needs to be replaced on the one binding and the board needs a tune but it's still in great shape. Next time I go to my parents place I'll send you pics.

Def hit me up. I've grown to love wiring projects. Maybe when it's a bit warmer out though

Josh if I come to mod day would you give a shit if I bring/work on my 50? Got no truck stuff I can afford to do right now aside from cleaning the damn thing.

 

Fuck Tuesdays! This day is DESTROYED!

 

Yea idc bring whatever. I can't guarantee how much time we'll have for everything but I'm down to drink beer and help work on shit. If you bring the 50 I'm gonna have to ride it

 

Hockey season is a very confusing time on TW.

 

No problem I need to finish an integrated hand/footbrake setup I had in the works for a bit but never had a chance to finish. Anyone can ride it, I'll just be happy to get the motor warmed up and running

 

So what does that mean? Instead of having front hand brake you'll have rear hand brake? Or are you some how able to have front and rear hand brakes and a clutch?

 

50's are auto, so no clutch. When I built the bike I was running only a rear hand brake, now I have a rear hand brake with a braided line running to the foot brake, then to the caliper. Still haven't put front brakes on this bike yet though.

 

Oh ok. My old pit bike had a clutch, 3 gears

 

Yes, yes it is.

 

Yeah many of the chinese ones have clutches and there are clutch kits you can get for honda's too. I will probably install one eventually just to get even more of a feel of a big bike but at that point I will probably to get another big bike again anyway. I miss riding but wheeling is definitely a good filler for the cold months.

 

Holy Crap! I thought the exact same thing.

 

Your welcome

 

Depending what the weather does I might swing by

 

Good I'll put u to work

 

I almost thought you where Doyb.

 

I was looking at some propane heaters in HD and most said they are for outdoor use or indoor-construction sites.... I've never used one before so I lack the knowledge and experience on the matter of propane, kerosene or similar heaters..... are they OK to use in a shed or a garage?

 

I have one that screws onto the top of a propane tank that I use in my garage

 

I've used the same in my shed as well. I did however have it at the entrance of the shed with the door cracked fairly wide open. The biggest worry with any propane heater is carbon monoxide poisoning. If you have a fairy large or well ventilated garage you are fine to use it. If the garage is a small single car garage I'd crack the bottom of the door open maybe 6-12".

 

PROPAINE IS OK TO USE AS LONG AS YOUR NOT PAINTING, USING CLEANING PRODUCTS ECT....
THAT BEING SAID I WOULD NOT USE ONE.....
MY BUDDY USES A MR BUDDY
WHY NOT JUST ADD A ZONE OF HEAT TO SAID GARAGE
ESPECIALLY IF ITS ATTACHED

 

Yea that sounds easier/cheaper...