LED Light Bar on Factory Fog Light Switch

Got a LED light bar that came in today. Came with this harness:

https://illuminationsupply.com/wiri...f04b2873c88cebe225668510ef8e6cb5#.UoWoUuBc_ww

I want to use one of the factory fog light switches like this:

http://www.ebay.com/itm/TOYOTA-TACO...Parts_Accessories&hash=item46104ecb0d&vxp=mtr

Can someone please walk me through on how this is done?

 

take the two wires that go to the switch and connect them to pins 3 and 4 on the fog switch

 

where are you located in so cal...i can help you with the wiring later if youd like

simple, take the wire from the relay for the "switch" to one of the switch ends then the other to a power source...

the 2 remaining pins on the switch are for the back light, which is a simple splice into any existing stock buttons

 

I'm in the Lakewood/long beach area

 

We sometimes have meets around there we can maybe do it then or just do the install at a mod day

 

Ok, I'll see what I can find first.

 

But it's really easy to wire. I just did one on a spare foglight switch I had (rigid duallys with relay)

 

Do you by chance have a wire diagram of what you did? That would help me out a lot.

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/195692-factory-fog-light-switch-hella-500s-2.html

Post 23

 

Added some pics to see if someone can visually walk me through wiring the switch.

 

Bump

 

You need the oem fog light switch wiring harness too I believe

 

Here's my situation: I've got stock fogs with OEM switch and I added a light bar that is wired straight off the battery so it's hot all the time. I got another OEM fog switch that I'm trying to use for the light bar.

Ok so I tried tapping the illumination pin off of the illumination wire on my existing fog switch and Its not illuminating. Any ideas? If I tap pin 2 off of pin 4 won't that make the illumination on all the time since my lightbar is wired straight to the battery? If this won't work then what's the nearest line I could splice into?

 

anyone? ^^^

 

Found this on another thread, perfect explanation on how to wire the switch. Use the 8th post down. http://www.tacomaworld.com/forum/2nd-gen-tacomas/195692-factory-fog-light-switch-hella-500s-2.htmlRun an add a fuse to your inside fuse box behind coin drawer from the switch.

 

Yeah I used this one but wasn't sure where to get the 12v acc source from. Do you happen to know which empty slot in the fuse panel behind the cointray I should use?

 

You can use this thread for reference http://www.tacomaworld.com/forum/technical-chat/6525-diy-wiring-after-market-lights.htmll but to be 100% sure you might want to get a voltmeter, you want to find a fuse that has power when this ignition is on but cuts power when the ignition is off.

 

I did this yesterday. Since I did the diff lock anytime mod that turns off TCS/ABS I didn't need my TCS button and replaced it with another fog switch for my roof lights. Used the factory illumination wires, very easy to pin-out. I should have the part numbers for the plug and pig tails from Toyota if you want them. The switch I got, like most lights up amber instead of green. I don't know if the bulb is a serviceable part but it's just a tiny green rubber cover over the bulb that makes it green. It's the little brown tab on the side near the front of the switch you can just unscrew and pop out.

 

What he said ^^^

 

Hey i know this is from awhile ago lol, but i wanted to do this same thing with my mic tuning light bar and led light bar switch. I have no idea on how to do it and no one has yet to give me a straight answer, if ya could help me out that'd be very appreciated, thanks for your time!