Method MR301 OR MR304

Does anyone have any experience with the Method Double standards? 301 or 304

I'm looking at the 16x8 6x5.5 with 0/4.5" offset.

I have a single cab 4x4 and I'm not sure if these rims fit our trucks with no lift?

I plan on lifting the truck eventually but not right now and I need to make sure these rims fit with no mods. (other than mud flap removal)

if you do have experience with these, how aggressive are they, I would like about an inch or so? (I hope that makes sense)

 

There several threads on Method wheels.

 

Sorry fir the stupidity but I searched Method rims and coudl't find a direct answer!
is there a better way to search (Method rims). I can't seem to get anywhere?

 

Try searching with standard or double standard.

 

I have the 301s and they bolt up, however there is a slight rub because of the backspacing

 

I have the MR304 Double Standards

 

i have 301s. 16x8 0/4.5BS no lift.

no rub for me on 2013 4x4. local 4 wheel parts swore they would never fit (wanted me to bump to 17), but Method said they would fit and enough people on here had them so i went ahead and got them, had someone else install.

 

Nice ride!! Been looking at these wheels. Are your tires the stock size(265/70/16)? Does your tires stick out a little past the flare? Where in NC are you?

 

my tires are stock (265/70/16). they stick out maybe 1/4 inch. this is only pic i have, not sure how easy it is to see here, but they do stick out a little. i'm in holly springs.


don't know why it keeps flipping my pic, sorry.

 

Nice thanks for the pic. I'm in Rocky mount. Get to drive my truck in the snow in the morning. Doesn't happen often around here