Pioneer AVH5500 install what all do I need

First don't shoooooot!

I have read a bunch of threads but I'm not good with this. I bought the pioneer AVH5500 head unit now I need to get the rest of what I need to do the install.

Going to try the Scosche double din kit

$40 TA2111BPB Compatible with 2012-15 Toyota Tacoma ISO Double DIN & DIN+Pocket Dash Kit; Black Pearl

TA2111BPB Glossy black pearl.

Factory USB port -

$10 AX-TOYUSB-2 2010-Up Toyota USB Adaptor

AX-TOYUSB-2
Steering wheel controls - ASWC-1
What harness do I need - 70-761 for 87-up
What do I need for the parking brake bypass?
What do I need for my iPhone? is it going to be different from the 4s to a 5s? as I plan on upgrading my phone in a few months.

Anything else I need/should get?

Any and all help is appreciated guys!

 

I believe the scosche harness is

$7 TA02B Stereo Wiring Harness Compatible with Select 1986-20 Toyota, Lexus, Scion and Subaru Vehicles - Aftermarket Radio Wire Harness for Car Stereo . Check Vehicle List Below for Your Model

TA02B. Check ebay. When I bought my dash kit, they included the harness. $23 shipped for both. For the parking brake bypass, try the microbypass. They sell on ebay for $20. Works great. As for the iphone, pioneer sells a cable for the that. Check their site for the correct one. You'll need the firmware update from Pioneer in order to use it with an iphone 5.

Decide if you're going to crimp or solder the harnesses together. You'll need the proper tools for each. There's a few videos online showing how to do this. It's easy. Just time consuming. Took me two hours to solder all the wires and 15 minutes to install it all in the truck.

You can run the microphone behind the glovebox, up the A pillar, across the windshield headliner and clip it into the overhead console.

 

Thanks man.

Do I need to use the scosche harness over the metra? I can't find the scosche double din kit anywhere but from them at this point. The original one they put out

$41 TA2111B Compatible with 2012-15 Toyota Tacoma ISO Double DIN & DIN+Pocket Dash Kit Black

TA2111B was just a matte black and I can find that all over but I found now that they sell a black gloss pearl one to match stock TRD like the metra kit.

Also when using the pioneer iphone cable can I no longer just hook up through my stock USB port?

 

Either harness should work. If you want to use the iphone apps on the radio, you'll need the special cable from them.

 

Which metra part number do in use to retain the factory USB? I'm
Getting conflicting info online.

$9 AX-TOYUSB - USB-Auxilliary Retention Harness - USB adaptor to retain the OE USB in select Toyota vehicles

AX-TOYUSB

$10 AX-TOYUSB-2 2010-Up Toyota USB Adaptor

AX-TOYUSB-2

What one do I need? Cause one site says the -2 the other says the othe one

 

I have the same head unit.

This harness:

$5 Metra 70-1761 Radio Wiring Harness For Toyota 87-Up Power 4 Speaker

http://www.amazon.com/gp/product/B0002BEQJ8/ref=wms_ohs_product?ie=UTF8&psc=1

This dash kit:

$29 Metra 95-8235CHG Double DIN Dash Installation Kit for 2012 Toyota Tacoma Vehicles (Charcoal High Gloss)

http://www.amazon.com/gp/product/B00A81NGK2/ref=wms_ohs_product?ie=UTF8&psc=1

Unfortunately the parking brake bypass I used isn't available on Amazon anymore.

I'll see if I can find the part number for the USB.

 

Here's the USB adapter I bought.

http://www.sonicelectronix.com/item_61468_Axxess-AX-TOYUSB.html

But I don't know if it'll fit your vehicle.

 

I've already got the harness and dash kit.. I went with the new scosche back pearl kit so we will see how that all fits..

The problem I'm having now is what axxes cable do I need cause I'm getting different Info online.. Metra says the toy USB-2

 

Do you have the 2012 non jbl?

 

No, 2013 non JBL.

 

It appears I'm being of no help. According to their site neither work for the 2012. I'll go back in the corner.

 

Should be all the same

 

Lol ya see that's my problem... But they didn't change anything from 12-13 that I'm aware of...

Audio guys chime in here please

 

I have the same deck. For the video bypass, unfortunately, the relay trick that works on older Pioneer dvd units will not work with this unit. I ended up just putting a switch on the brake wire from ground. Works perfectly fine and I found that I almost never use it for video anyway. Good luck with the install.