5 lugger bs thread

I don't think there would be a flange issue. The third I put in mine was built for a Sequoia which is why it had flange mating issues with the driveshaft. Pretty sure the tacoma flanges all have the same bolt pattern.

 

Got ya!

 

You can also call Chase at ECGS to double check.

 

Incorrect same flange for non E-LOCKED rears, like I said, same bolt pattern on the ring gear, same bearing size on the dif, same spline dia and count. With that being said if you can find a complete third from a pre 09 non E-LOCK with the Hino LSD in it, that would be your easiest option as you wont have to worry about shims.

He wasn as helpful as I had hoped when I was searching for info on the 5lug axles to see if the swap was gonna work. I was flying blind and crossing my fingers till I found the below link.

Here is the link again, click rear 95.5 and up, will give you all the info you need.

http://home.4x4wire.com/erik/diffs/#T100-Tundra

 

certain years t100/seqioas(sp) have the exact same rear end and fit right in and everything attcachs perfectly. im running a T100 3rd with 4.88s and LSD

 

im surprised this is still being discussed. they should sticky some info in this section.... this shit has been disscussed years ago

 

LOL, I still want to know who you got that beefed up clutch from. Was it LCE?

 

and phil as much as i cant stand your gay ass most of the time i will give you thumbs up on the wheel/truck color scheme.

 

i look when i get home its in a box on my passanger seat... been there for a year

 

werd, working on turbo, gonna need to line up all sorts of parts.

 

i was on that path about 2 years ago... hardest part was getting a mani built ...idk whats out there now. im selling the truck now ... on to better things.

 

How much you want for that clutch? Apparently there is a guy back in my home state with a log mani, linked me to treadstone who offers a log cast, log tube, and full tube build it yourself kit. Still waiting to here if it works with the 2tr head.

 

there was a guy on CT that was going to fab me one ... never got that far . think he wanted like 600

100 plus shippin?

 

Werd, you got paypal? It's a grippier puck with a stiffer pressure plate right? That sounds about right on the custom header. Just heard back from treadstone that this will work on the 2tr head, I'll fab it myself so not too bad for 350ish shipped.

http://www.treadstoneperformance.co...ame=Toyota+Tacoma+DIY+Manifold+Collector+Kit+

 

i do .. ill post pics and info tmw about the clutch

 

Werd

 

These should fit, shouldn't they?

http://www.summitracing.com/parts/crr-3995812/overview/

Cragar Soft 8 Silver. 15x8. 5x4.5 BC. 4.5BS. -13mm offset.

 

A small amount I can deal with. Ya got the exact same ones I linked to eh? Pic of em' on the truck at all?

 

To be correct, it is the caliper bracket, not the caliper itself.

How she riding with the added weight of the hitch? Any noticable differences? And when you putting final down payment on mid travel? Good seeing you on Sat btw, too bad you're an anti social wench.

It is a finite amount, dremel, grinder, table grinder will get the job done. Real simple, pull wheel, pull bracket, trim front edge (edge towards wheel, parallel with rotor), spray with some primer to hinder rusting, reinstall. Done and done.