Maxtrac Spindle Lift for 2nd Gen Prerunners

Thank you, I like where it's going.

As far as vibration, I do have a light shake between 45 and 60. I've been told it's an alignment/balance issue. I've had the alignment done 2 times already, and it goes away for a little while but keeps coming back. I have a lot of friends that work on cars and they told me that you can have issues with some tires having very minor defects that you can't see, but will have more of an effect on lifted vehicles. Personally I think it's the spacers, so I recently ordered a new set of rims (with the proper BS) and tires, hopefully this will fix the problem. Again, it's not a bad shake, just a little annoying.

Hopefully this helps, and hopefully you won't have the same issues. I haven't read of many people having this problem, so I think I'm a special case...

 

The vibes are probably due to you using the spacers on the wheels.

 

Maxtrac Spindle
Bilsteins set at 2.5
4 inch rear block.

 

What size tires? 285?

 

285/70/17

 

Thanks bandit.

 

Yup, got my new wheels and tires and rims on today and the vibe is ALL GONE!! Rides like new again, but looks 100 times better.

 

Set at 2.5? or 1.75? Mine are set at 1.75 and looks the same. How's the shudder from take off? Did you do a cb drop?

 

What do you got for the rear to make it level? I got a 2'' block and it has a noticeable lean.

 

4" block until like three weeks or how ever long it takes allpro to ship out my new pack.

 

Thanks, Got some side pics?

I too want a leaf pack.. I emailed headstrong about dakars and got quoted $519ish with bushings and extended lines..

How much for All pro's?

 

Maxtrac 4 inch spindles billy 51s set @ 1.75 and eibach 1.6 springs. Rides great alignment is almost perfect (stock ucas) MAJOR bro lean but ill be running some king shocks and all pro leaf pack soon. Couldnt be happier. Maxtracbob is the man also just sayin ....

 

So still having the vib issues on take off. Only time it really vibes that I notice. I have tried the 1/4" ome cb spacer, the 3/8" maxtrac spacer. and tried them combined and nothing. to fix. Thinking of the Beefed taco 1 1/2" or 2 1/2" not sure which one I need.I don't want to order the wrong one and then have to order another. What do you guys suggest? Just buy longer bolts and a handful of washers and try that one at a time starting at 1/4" ?

 

That price is delivered or no ?

 

Thanks bud... I really appreciate that but You guy's are the one's I thank... you guy's are my boss and you guy's pay my paycheck....

 

On our 4" block our spacer is all you need... makes me wonder what's going on... can you take pics and send them to me???? I would like to see.... I would say the block was I backwards but it would be more severe. Did it change at all when you put the different spacers in???

 

Yes delivered to WA state.

 

That's good news. What wheels and tires did you get? No pics??

 

Sorry for the picture delay, waiting for a nice day and some down time from work, I'll have new pics up soon.

 

My spindles should be delivered today