[META] Can we keep these quotes under control?

Delmarva · Feb 7, 2014

braik[OP] said: ↑

That... makes sense. Too bad it didn't exist 30min ago. And nothing will convince me otherwise.
Click to expand...

We can forgive you as you're still "new" here...

but have a look around... there are a million sub-forums on TW (<--exaggeration)

Delmarva · Feb 7, 2014

TimmyB said: ↑

With A-trac you can fit 37's
Click to expand...

Wrong! You can fit only 35s with ATRAC... for 37s, you need a locker too.

dilligaff82 · Feb 7, 2014

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

Wait what was the question again?

landphil · Feb 7, 2014

Braik, you make a good point, too bad the TW crowd in general is so immature.

OZ-T · Feb 7, 2014

landphil said: ↑

Braik, you make a good point, too bad the TW crowd in general is so immature.
Click to expand...

hard to argue

Delmarva · Feb 7, 2014

OZ-T said: ↑

hard to argue
Click to expand...

Indeed

steve o 77 · Feb 7, 2014

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

good job

brny67 · Feb 7, 2014

Op u asked for this...but welcome to the world.

moondeath · Feb 8, 2014

landphil said: ↑

Braik, you make a good point, too bad the TW crowd in general is so immature.
Click to expand...

Germ · Feb 7, 2014

TimmyB said: ↑

With A-trac you can fit 37's
Click to expand...

Delmarva said: ↑

Wrong! You can fit only 35s with ATRAC... for 37s, you need a locker too.
Click to expand...

So it's safe to assume with ATRAC, rear locker and 3" lift I can fit 42's and still get 24 mpg right?

Delmarva · Feb 8, 2014

Germ said: ↑

So it's safe to assume with ATRAC, rear locker and 3" lift I can fit 42's and still get 24 mpg right?
Click to expand...

44s

gearcruncher · Feb 8, 2014

I see meme coming anytime .
Could be a few more sticky,s from what I can tell .
Every third post is a new vibration thread - if there was a way to combine all the fixes into a sticky lol
Every 2nd post is a what size lift thread
Every 4th post is a what size tire thread

neonlazer · Feb 8, 2014

DAFUQ, why is chrome trying to connect to a bad site when im reading this thread?! Yay for connection blocking...

2014/02/08 08:00:11 -0600 JEFFREY-DESKTOP Jeffrey IP-BLOCK 64.29.151.221 (Type: outgoing, Port: 52584, Process: chrome.exe)

RearViewMirror · Feb 8, 2014

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

OZ-T said: ↑

2nd Gen haha
Click to expand...

davidpick said: ↑

i agree.
Click to expand...

medic2230 said: ↑

Like this?
Click to expand...

A7xschecter6661 said: ↑

This only applies to the 2nd gen forum? Lol

I do agree though, sometimes it's annoying if it's a huge post. Delete any part of the quote your response does not relate to.
Click to expand...

Delmarva said: ↑

my sentiments exactly
Click to expand...

Delmarva said: ↑

oh and the compulsory quoting...
Click to expand...

moondeath said: ↑

Like this? Sorry, I couldn't resist.
Click to expand...

bjboucher said: ↑

Yeah! I see a good Friday night thread coming out of this one.
Click to expand...

Greensystemsgo said: ↑

This.
Click to expand...

Pugga said: ↑

This.
Click to expand...

Germ said: ↑

Hey guys, what's the largest size tire I can fit without rubbing?
Click to expand...

95 taco said: ↑

x2
I believe it also uses more data for it to be quoted if you are on mobile.
Click to expand...

F16TACO said: ↑

LMAO.
Click to expand...

braik[OP] said: ↑

It's the only one I frequent, so it's the only one I'm worried about . Seriously though, I just didn't know where to put it.

That being said, I shoulda known I would get this kind of response,
Click to expand...

braik[OP] said: ↑

Congratulations. You've all effectively screwed the mobile users who happened to check this thread. They've all went over their data limits for this month.
Click to expand...

Delmarva said: ↑

this may have been a good starting point:

http://www.tacomaworld.com/forum/site-suggestions/
Click to expand...

Delmarva said: ↑

Oh, and this.
Click to expand...

Pugga said: ↑

:firstworldproblems:
Click to expand...

braik[OP] said: ↑

That... makes sense. Too bad it didn't exist 30min ago. And nothing will convince me otherwise.
Click to expand...

95 taco said: ↑

Click to expand...

Delmarva said: ↑

We can forgive you as you're still "new" here...

but have a look around... there are a million sub-forums on TW (<--exaggeration)
Click to expand...

TimmyB said: ↑

With A-trac you can fit 37's
Click to expand...

Delmarva said: ↑

Wrong! You can fit only 35s with ATRAC... for 37s, you need a locker too.
Click to expand...

dilligaff82 said: ↑

Wait what was the question again?
Click to expand...

landphil said: ↑

Braik, you make a good point, too bad the TW crowd in general is so immature.
Click to expand...

OZ-T said: ↑

hard to argue
Click to expand...

Delmarva said: ↑

Indeed
Click to expand...

steve o 77 said: ↑

good job
Click to expand...

brny67 said: ↑

Op u asked for this...but welcome to the world.
Click to expand...

Germ said: ↑

So it's safe to assume with ATRAC, rear locker and 3" lift I can fit 42's and still get 24 mpg right?
Click to expand...

Delmarva said: ↑

44s
Click to expand...

gearcruncher said: ↑

I see meme coming anytime .
Could be a few more sticky,s from what I can tell .
Every third post is a new vibration thread - if there was a way to combine all the fixes into a sticky lol
Every 2nd post is a what size lift thread
Every 4th post is a what size tire thread
Click to expand...

neonlazer said: ↑

DAFUQ, why is chrome trying to connect to a bad site when im reading this thread?! Yay for connection blocking...

2014/02/08 08:00:11 -0600 JEFFREY-DESKTOP Jeffrey IP-BLOCK 64.29.151.221 (Type: outgoing, Port: 52584, Process: chrome.exe)
Click to expand...

OP..... WTF were you thinking???? You brought this on yourself. I wish this is the most important thing that have to worry about in my life. You have it good in life if this is your biggest complaint. Welcome to any internet forum. Get over it!

RearViewMirror · Feb 8, 2014

landphil said: ↑

Braik, you make a good point, too bad the TW crowd in general is so immature.
Click to expand...

Yup....

Delmarva · Feb 8, 2014

RearViewMirror said: ↑

OP..... WTF were you thinking???? You brought this on yourself. I wish this is the most important thing that have to worry about in my life. You have it good in life if this is your biggest complaint. Welcome to any internet forum. Get over it!
Click to expand...

RearViewMirror said: ↑

Yup....
Click to expand...

:irony:

RearViewMirror · Feb 8, 2014

Delmarva said: ↑

:irony:
Click to expand...

Pointing out the stupidity of the post and yes... I'm a dick. So what.

*EDIT* Forgot to leave this here

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

Pope953 · Feb 8, 2014

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

I feel the need to post something witty but nothing comes to mind so I'll just quote this and leave this comment here.

RearViewMirror · Feb 8, 2014

Hey... ^^^ My truck ^^^

braik[OP] initial post: ↑

I love "how to" threads. I probably look at a dozen or so every week. Seeing someone do a mod or repair step-by-step with pictures along the way is almost the whole reason I joined this forum in the first place. That being said... I DON'T NEED TO SEE IT MORE THAN ONCE!

What I mean is when you're quoting the OP, or anybody else in the thread, pasting their whole step-by-step process complete with pictures with just a "Good job!" at the end is unnecessary and gets in the way. By all means tell them they did a good job, but quoting everything they said is ridiculous. Especially in the case of some users who are checking in on mobile, scrolling through half a page of pictures and instructions they've already seen is tedious.

If we only quote the parts we are replying to, it would make the threads smaller and much easier to navigate. Plus, all that pasting may throw off the SEARCH feature by giving the same result in multiple places. (I'm not sure if it works that way)
Click to expand...

Mr Salty · Feb 8, 2014

I always just use the exclude quotes button. I works great and excludes any and all quotes so you just get whatever is new in each post.

The option is available in "panel control"

Log in or Sign up

Welcome to Tacoma World!

[META] Can we keep these quotes under control?

#21
Delmarva Mayor of TW

#22
Delmarva Mayor of TW

#23
dilligaff82 Well-Known Member

#24
landphil Fish are FOOD, not friends!

#25
OZ-T I hate my neighbour

#26
Delmarva Mayor of TW

#27
steve o 77 braaap

#28
brny67 Well-Known Member

#29
moondeath Well-Known Member

#30
Germ Master Navigator/Zipper Operator

#31
Delmarva Mayor of TW

#32
gearcruncher Well-Known Member

#33
neonlazer Mechanically Goofy

#34
RearViewMirror Saw things so much clearer once you... were in my

#35
RearViewMirror Saw things so much clearer once you... were in my

#36
Delmarva Mayor of TW

#37
RearViewMirror Saw things so much clearer once you... were in my

#38
Pope953 That's a fact Jack!

#39
RearViewMirror Saw things so much clearer once you... were in my

#40
Mr Salty "Give up the good to go for the great"

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

[META] Can we keep these quotes under control?

#21 Delmarva Mayor of TW

#22 Delmarva Mayor of TW

#23 dilligaff82 Well-Known Member

#24 landphil Fish are FOOD, not friends!

#25 OZ-T I hate my neighbour

#26 Delmarva Mayor of TW

#27 steve o 77 braaap

#28 brny67 Well-Known Member

#29 moondeath Well-Known Member

#30 Germ Master Navigator/Zipper Operator

#31 Delmarva Mayor of TW

#32 gearcruncher Well-Known Member

#33 neonlazer Mechanically Goofy

#34 RearViewMirror Saw things so much clearer once you... were in my

#35 RearViewMirror Saw things so much clearer once you... were in my

#36 Delmarva Mayor of TW

#37 RearViewMirror Saw things so much clearer once you... were in my

#38 Pope953 That's a fact Jack!

#39 RearViewMirror Saw things so much clearer once you... were in my

#40 Mr Salty "Give up the good to go for the great"

Products Discussed in Entire Site Forum: 2nd Gen. Tacomas (2005-2015)

#21
Delmarva Mayor of TW

#22
Delmarva Mayor of TW

#23
dilligaff82 Well-Known Member

#24
landphil Fish are FOOD, not friends!

#25
OZ-T I hate my neighbour

#26
Delmarva Mayor of TW

#27
steve o 77 braaap

#28
brny67 Well-Known Member

#29
moondeath Well-Known Member

#30
Germ Master Navigator/Zipper Operator

#31
Delmarva Mayor of TW

#32
gearcruncher Well-Known Member

#33
neonlazer Mechanically Goofy

#34
RearViewMirror Saw things so much clearer once you... were in my

#35
RearViewMirror Saw things so much clearer once you... were in my

#36
Delmarva Mayor of TW

#37
RearViewMirror Saw things so much clearer once you... were in my

#38
Pope953 That's a fact Jack!

#39
RearViewMirror Saw things so much clearer once you... were in my

#40
Mr Salty "Give up the good to go for the great"

Products Discussed in