What have you done to your Tacoma today? 1st Gen Edition

Mine was running 203-208 before so it was too hot this brought it back to factory specs

 

Got any pics of the frame mounts?

 

Thanks man!

 

the hotter you can run it without over heating it or causing detonation etc the better the mpg. your power will fall off though with an increase in temps

 

Not rreally, they just run along the frame rail usung the two bolt holes on the side one one lower one I use for plate or swingout bumpers.. this bumper wiil only use the two side holes.. then the end is notched around the tubing. pretty simple. I thing the frame is 3 1/2" tall but I cut the plates to fit up around the factory shackle mounts too.. ill try to get one and ill post it in my fab thread

 

Got my all-pro goodies on today! bumper/sliders

 

Looks great!!

 

Got my CB working with an external speaker mounted where the clutch petal would be if I had one and cut my tailpipe because it was interfering with my leaf spring with 2" shackle.

 

Finished the swap from my factory buckets to a set of 2nd gen 4runner seats it's like a lazy boy stuffed in the truck. Now my back doesn't feel like it's breaking with every bump

 

They need custom mounts? And I'd imagine 2nd gen 4runner buckets would be just as uncomfortable. 2nd gen 4 runners are from the early 90s. What year did you get them out of?

 

Built a storage box to keep things and such.

 

just seafoamed my engine, 1/3 added to oil, 1/3 added to vacuum line, 1/3 added to gas tank...

it didnt smoke as much as i thought it would but it was a solid stream of smoke for about 2 min. now im about to go drive around a while and then do my oil change. sadly sense ive been jobless for 4 months its been about 9,000 miles since my last oil change

im also about to buy new brake pads/rotors, spark plugs, fuel filter, and a catalytic converter all from Rockauto.com which ill hopefully have shipped to me by next weekend so i can do them

 

Installed some Hella 700ff's I got from another member.





Just need to adjust them tonight or some night when its not 20*F

 

Well not completely custom. They were close in dimensions. I had to take the feet off my factory seats and put the on the 4 runner seats. And the rear mounts required some modifications. They came out of a 94 model. There were different seat options available, but these were the best they offered. They are a night and day difference from the stock seats. Love em! I'll try and post up some pics later to show the difference

 

heading out camping with the fam in about 10 minutes. Might be a cold night.

 

Got my expos, shackles, and Icons installed! Was talking about other stuff with my buddy so by the time I left it was dark.... But here are a couple of garage pics....

 

there ya go. i made you a fire

 

Did some wheeling and got.mud flung all inside my truck

 

Finished up my half doors today.